Your Selected Vehicle
Parts for your 2013 Honda Cr-v-Headlights
LEDAUT 12V LED Interior Light 31PCS SMD LEDs Equivalent To 15 Watt Globe Blister Pack - 1031
Fitment Notes:
Explore 4WD & Adventure
OEX Pre-wired replacement spring contact to suit BA15S Globe Holder - 2 Pce - ACX2471BL
Fitment Notes:
LEDAUT 12V LED Interior Light 61PCS SMD LEDs Equivalent To 30W Globe With Switch - 1061/12SW
Fitment Notes:
MaxiTrac 180mm LED Driving Light Kit, 13777 Lumens, Waterproof, Wiring Harness Included - MTDL-180KIT
Fitment Notes:
MaxiTrac 24 LED Light Bar, 500mm Long, Integrated Park Light, 10320 Lumens - MTLB-124
Fitment Notes:
MaxiTrac 220mm LED Driving Light Kit, 20582 Lumens, Waterproof, Wiring Harness Included - MTDL-240KIT
Fitment Notes:
Projecta 12V 1500A Intelli-Start Emergency Lithium Jump Starter and Power Bank - IS1500
Fitment Notes:
Guide to Replacing and Maintaining Headlights on Your 2013 Honda CR-V
Owning a 2013 Honda CR-V is about enjoying reliable transport with added comfort and an impressive array of features. One crucial maintenance aspect that sometimes gets overlooked is the care of your headlights. Good headlights do more than illuminate the road, they ensure your safety as well as that of others. Whether you need to replace a bulb or just perform regular maintenance, knowing how to handle your CR-V's headlights is essential.
When it comes time to replace a headlight bulb, the process is fairly straightforward. Make sure you have the right bulb size, for a 2013 Honda CR-V, the low beam typically uses an HB4 bulb. To get started, pop the bonnet and locate the headlight housing area behind your front bumper. Ensure your car is switched off and the keys are out of the ignition to avoid any electrical mishaps.
- Identify the Bulb Housing: You'll see a black plastic cover at the back of the headlight assembly. Twist it to remove the cover and expose the bulb socket.
- Remove the Old Bulb: Disconnect the wiring harness from the back of the bulb. Grip the bulb firmly and twist counterclockwise to remove it from the socket.
- Install the New Bulb: Avoid touching the glass part of the new bulb with your fingers, as oils from your skin can shorten its life. Line up the new bulb with the socket, twist it clockwise to lock it into place, and reconnect the wiring harness.
- Secure and Test: Replace the plastic cover by twisting it back on. Finally, turn on the car and switch on the headlights to ensure everything is working correctly.
Regular maintenance of your headlights is just as important as replacing them. Over time, headlight lenses can become foggy or yellowed due to UV exposure and grime. It's worthwhile to periodically clean your headlights with a dedicated cleaner or even a DIY paste of baking soda and water. Applying a UV-resistant sealant afterwards can also keep them looking clear for longer.
Check your headlight alignment periodically to ensure they're pointing in the correct direction. Misaligned headlights can hinder your visibility and annoy oncoming motorists. Adjusting them is usually a matter of turning the alignment screws located on the headlight assembly.
Should your headlights ever develop issues like flickering, it could be a sign of electrical problems. In such cases, consulting a professional mechanic is the way to go.
Incorporating these practices into your regular vehicle maintenance routine will not only extend the life of your headlights but also enhance your safety and driving experience. So go ahead, give your 2013 Honda CR-V the love it deserves with a headlight check-up today.