Your Selected Vehicle
Parts for your 2013 Honda Civic-Pedal pads
Explore 4WD & Adventure
2013 Honda Civic pedal pads — what they do and when to replace them
Based on Honda technical references, pedal pads are absolutely relevant to the 2013 Honda Civic. The Honda Electronic Parts Catalog (EPC) lists a rubber “Pad, Brake Pedal” for 2012–2015 Civic models (commonly referenced as P/N 46545-S5A-003, confirm by VIN), and manual-transmission variants also list a clutch pedal pad. The Honda Civic Service Manual (2012–2015), Brakes and Clutch sections, specifically include inspection criteria for pedal pad wear and condition. That means the 2013 Civic is designed to use pedal pads on the brake pedal (and on the clutch pedal for manuals), while the accelerator is typically a one-piece plastic tread without a separate rubber pad.
On the Civic, the pedal pads are those grippy rubber covers that slip over the metal pedal face. Their job is simple but critical: they keep the driver’s foot planted, especially in the wet, and they dampen vibration for better feel and control. Over time the rubber hardens, smooths off, or cracks. When that happens, the risk of a foot slipping goes up — a quick safety fail at WOF or during a roadworthy check.
There’s no strict time-based replacement interval, but it’s smart to inspect the pads at every service. If the rubber’s glossy, hardened, torn, or the tread is worn flat, swap them out. Replacement is a quick, low-cost job and makes a noticeable difference to pedal feel.
- Signs it’s time to replace:
- Shiny, slippery surface or flattened tread ribs
- Cracks, splits, or missing chunks
- Pad slipping on the metal pedal or edges curling
Basic replacement tips for a 2013 Civic:
- Confirm the correct pad by VIN in the Honda EPC (brake pedal always, clutch on manuals).
- Clean the pedal face, a wipe with mild detergent helps the new pad seat.
- Warm the new pad slightly to make it more pliable, then hook the bottom lip and roll it over the pedal until all edges snap into the groove.
- Press all around to ensure full engagement — no gaps or rocking.
Keep the pads clean (no silicone dressings — they’re slippery). If the vehicle sees lots of wet or muddy driving, check them more often. For ADR/WOF compliance and everyday safety, fresh, grippy pedal pads are a small investment that pays off every time they hit the brakes.
Popular questions
What pedal pads fit a 2013 Honda Civic?
Most 2013 Civics use a dedicated Honda brake pedal pad commonly referenced as 46545-S5A-003. Manual models also have a clutch pedal pad. Always confirm fitment by VIN in the Honda EPC or with a dealer because trims and regional specs can vary.
How do I know my pedal pad needs replacing?
If the rubber’s gone shiny, feels slippery in wet shoes, shows cracks or chunks missing, or the tread ribs are flattened, it’s due. Any looseness on the pedal face is also a red flag. These conditions are not only unsafe but can also trigger WOF/roadworthy issues.
Does the accelerator pedal have a rubber pad?
On the 2013 Civic the accelerator is typically a one-piece plastic tread, so there’s no separate rubber pad to replace. If it’s worn or damaged, the usual fix is replacing the pedal cover or the pedal assembly per the service manual.
