Your Selected Vehicle
Parts for your 2013 Holden Commodore-Headlights
LED Autolamps Twin Function Stalk Side Indicator With Red/Amber Side Marker LHS Multivolt - 805ARIML
LED Autolamps 12V LED Stop/Tail/Indicator/Reverse Assemnly Lamp With 108 LEDs - 80BARW
Explore 4WD & Adventure
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Lamp 97 LEDs With Black Bracket - 200BARWM
LED Autolamps 12/24V LED Stop/Tail/Indicator Light 284x100x27mm Blister Pack - 282ARRM
LED Autolamps 12/24V Round Indicator Lamp With Clear Lens 130mm Diameter Recessed Mount - 102ACM
LED Autolamps RHS, Stop/Tail/SEQ-Indicator/Reverse/Reflector 12/24V 284 X 100 X 37mm, DT04 Connector - SO284RHS
LED Autolamps MultiVolt R.H.S Stop/Tail/Indicator Assembly 128 Round LEDs - 125BARMR
LED Autolamps Twin function front position with supplementary front indicator - 97WIM
LED Autolamps Twin function rear position with supplementary rear indicator - 97CRIM
LED Autolamps Twin function rear position with supplementary rear indicator - 97RIMB
LED Autolamps 12V Stop/Tail/Indicator/Reverse Assembly Chrome Bracket Blister Pack - 82CARRW
LED Autolamps Front End Outline Marker White 12/24Vwith 2P plugs 10cm cable - 58WMB2P
LED Autolamps Front Marker LED White With Reflector 12-24V Perm Mnt - EU38WMHD
OEX Black Nylon Cable Ties - 4.8mm x 200mm, with Mounting Hole - 100 Pc - ACX1318
LED Autolamps 12/24V Rear Indicator Light With Amber Lens Blister Pack - 113AMG
LED Autolamps Twin function rear position with supplementary rear indicator - 97CRIMB
2013 Holden Commodore Headlights
Headlights are absolutely fitted to the 2013 Holden Commodore. Under Australian Design Rules (ADR 13/00 for lighting installation and ADR 46/00 for headlamps), all passenger vehicles must have compliant headlamps. New Zealand requirements are similar under the Land Transport Rule: Vehicle Lighting 2004. So headlights aren’t just relevant—they’re mandatory and a core safety system on this model.
On a 2013 Commodore, the headlights do the heavy lifting at dusk, night, and in poor weather. Low beam is tuned to give a wide, even spread without dazzling oncoming traffic, while high beam throws light further down the road for open-road visibility. Many trims use halogen projector units, and some variants pair them with LED daytime running lamps—handy for being seen, but DRLs aren’t a substitute for proper headlights.
As part of regular servicing of the 2013 Holden Commodore’s headlights, it pays to keep a simple routine. Replace bulbs in pairs so brightness and colour match. Avoid touching halogen glass with bare fingers—oils can shorten bulb life. Keep the lenses clean with pH-neutral car wash and a soft cloth, if the lenses look yellow or cloudy, a proper restoration kit or professional refinish can bring back clarity.
Moisture or fogging inside the unit usually points to a tired seal or cracked cap—sort that early to prevent corrosion on connectors. If a light is out, check the relevant fuse and relay before ordering parts. After any bulb change, confirm the aim, most Commodores include a leveling adjustment, but workshop alignment ensures the beam pattern meets ADR/NZ standards and doesn’t glare other drivers.
- Watch for signs it’s time: dim output, flickering, visible lens haze, or moisture.
- During replacement, secure the dust cap properly, route the wiring as found, and use quality, ADR-compliant parts.
- Have the headlights inspected at every service or roughly every 10,000–15,000 km, bulbs typically last 2–4 years depending on use.
Looked after, the Commodore’s headlights will give confident, legal illumination—making night drives feel easy and keeping WOF/roadworthy checks stress-free.
Popular questions about 2013 Holden Commodore headlights
What headlight bulbs does a 2013 Commodore use?
It varies by trim and whether the car has projector low beams or any premium lighting package. Many use halogen bulbs for both low and high beam. The safest bet is to check the owner’s manual or parts guide by VIN to confirm exact fitment before buying.
Can LED or HID upgrades be fitted legally?
Only if the parts comply with ADR/NZ rules and are installed to maintain the correct beam pattern without glare. That usually means using purpose-designed, compliant assemblies. After any upgrade, have the aim checked professionally to keep things legal and safe.
How do you fix cloudy or yellowed headlight lenses?
Light haze can be polished with a quality restore kit that includes UV sealant. Heavier oxidation often needs a professional refinish. Keeping lenses clean and protected with a UV-safe sealant helps them stay clear longer.