Parts for your 2013 Holden Colorado-Wiper blades

2013 Holden Colorado wiper blades

Wiper blades are absolutely fitted to the 2013 Holden Colorado ute. This is confirmed by the 2013 Holden Colorado Owner’s Handbook (windscreen wiper and washer sections) and GM Global Service Information for the RG platform, which both outline blade care and replacement procedures. It also aligns with Australian and New Zealand road standards requiring operational windscreen wipers on road‑going vehicles.

On this Colorado, the front wiper blades clear rain, road grime and spray to keep the windscreen visible in all sorts of Aussie and Kiwi weather. They’re a simple part with a big job: good blades improve visibility, reduce eye strain on long drives, and help the demister do its thing more effectively. Note for buyers: the ute body style does not have a rear wiper, only the Colorado 7/Trailblazer SUV variant gets one.

As part of regular servicing, wiper blades deserve quick, routine attention. Most owners will be best served replacing them every 6–12 months, sooner if the vehicle sees lots of sun, salt air, dust, or alpine conditions. The Owner’s Handbook and GM service procedures both call out straightforward removal/installation of the front blades, and it’s worth choosing quality beam or hybrid blades that match the arm fitting used on the RG Colorado.

• Tell‑tale signs it’s time to replace: streaking, chattering/judder, squeaks, missed patches, or visible cracks and fraying on the rubber.
• Clean the rubber edge and windscreen monthly with a damp cloth to lift road film, it restores wipe quality and extends blade life.
• Always use proper washer fluid rather than plain water, it cuts grime and helps prevent nozzle blockages and algae growth.
• Avoid dry wiping. If the glass is dusty, give it a wet wash first to protect the rubber edge.
• Parking in shade where possible helps slow UV hardening. In frosty regions, gently free the blade before use.

1. Lift the wiper arm carefully off the windscreen.
2. Release the blade from the arm connector per the handbook diagram.
3. Clip on the new blade, checking the adaptor is seated and locked.
4. Lower the arm onto the glass and test with washer spray for a clean, even sweep.

Exact blade lengths and connector type can vary by trim or accessory arms, so it’s smart to check the handbook, a trusted fitment guide, or measure the current blades before buying. Fresh, correctly sized blades make a noticeable difference to confidence behind the wheel.

FAQs

What size wiper blades does a 2013 Holden Colorado use?
Most 2013 Colorado utes use a longer blade on the driver’s side and a shorter one on the passenger side. Because lengths can vary with trim or replacement arms, it’s best to confirm via the Owner’s Handbook, a reputable fitment guide, or by measuring the existing blades before purchase.

How often should the wiper blades be replaced?
In Australian and New Zealand conditions, every 6–12 months is a good rule of thumb. If the ute lives in strong sun, coastal air, dusty roads or sees frequent washing, expect the rubber to age quicker and replace on the earlier side or as soon as streaking or noise appears.

Does the 2013 Colorado ute have a rear wiper?
No. The 2013 Colorado ute does not have a rear wiper. The Colorado 7/Trailblazer SUV variant is the model equipped with a rear wiper and washer system.