Your Selected Vehicle
Parts for your 2012 Mitsubishi Lancer-Tail lights
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Assembly With 4 Lamps - 80BARRWM
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator Assembly 3 Lamps With 108 LEDs Black Bracket - 80BARR
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
Narva 9 - 33 Volt LED Rear Stop/Tail And Direction Indicator Lamp Kit (Red/Amber) - 94526
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator Lamp With Reflex Reflector 2 Pack - 151BAR2
Fitment Notes:
Explore 4WD & Adventure
LED Autolamps 12/24 Multi Volt Stop/Tail/Indicator/Reverse Assembly Lamp With 108 LEDs - 80BARWM
Fitment Notes:
Hella DuraLED Combi-S Heavy Duty 12/24V LED Stop/Tail/Indicator Lamp with6M Lead - 23786MBULK
Fitment Notes:
LED Autolamps 12/24V 16 LED Stop/Tail Indicator Lamp Black Bracket Blister Pack - 201BSTIM
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp Black Bracket With 40cm Wire - 80BSTIM
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly 3 Lamps With 153 LEDs - 125BARWM
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator/Reverse Assemnly Lamp With 108 LEDs - 80BARW
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Lamp 97 LEDs With Black Bracket - 200BARWM
Fitment Notes:
LED Autolamps 12V 82 Series Stop/Tail/Indicator/Reverse Lamp Black Bracket - 82BARW
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp 190x95x28mm Blister Pack - 280ARM
Fitment Notes:
Narva 9-33 Volt L.E.D Reverse Lamp White with Red L.E.D Tail Ring and Black Base - 94312
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Right Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312R
Fitment Notes:
LED Autolamps Stop/Tail Indicator With 18 Square LEDs Multi Volt Blister - 35ARM
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable, Bulk Pack Of 4 - 97010-1/4
Fitment Notes:
Narva Model 70 Rear Stop/Tail /Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97000-1-D
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail and direcion indicator and reverse lamp with in built retro reflector and 0.5m hard wired cable - 97310
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator/Reverse With Reflectors And 500mm LP Cable - SO283ARWM2LR12
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Left Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312L
Fitment Notes:
Stedi C-4 Black Edition LED Light Cube Flood Pattern 4 LED Work Light - LEDWORK-C4-FLOOD
Fitment Notes:
Repco Wireless 1.5M Trailer Board With Rear Combination Lights 20 Metre Range - RTBW
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97010-1-D
Fitment Notes:
Understanding Tail-Lights on the 2012 Mitsubishi Lancer
The 2012 Mitsubishi Lancer is equipped with tail-lights, making them an essential component of this vehicle's lighting system. Tail-lights are standard on virtually all modern cars, including the Lancer, and serve vital safety and functional purposes when driving, especially during nighttime or low visibility conditions.
Tail-lights on the 2012 Mitsubishi Lancer are located at the rear of the vehicle and illuminate whenever the headlights or parking lights are switched on. These lights help other drivers on the road see the Lancer from behind, reducing the risk of rear-end collisions. They also work in conjunction with brake lights and turn signals to communicate the driver's intentions, such as slowing down, stopping, or turning.
Understanding the role of tail-lights is important for every Lancer owner. They don't just make the car look complete or stylish but are crucial for road safety and legal compliance. Driving without functioning tail-lights may result in fines and, more importantly, poses a serious safety hazard to both the Lancer's driver and others on the road.
When it comes to maintaining or replacing the tail-lights on a 2012 Mitsubishi Lancer, there are some handy things to keep in mind. Tail-light assemblies typically consist of several components including lenses, bulbs or LED modules, wiring, and housing units. Over time, these parts can wear out, become damaged, or accumulate dirt and moisture, all of which can affect their performance.
For routine maintenance, it's a good idea to regularly check the tail-lights as part of your vehicle servicing schedule. This can be done by switching on the tail-lights and visually inspecting for brightness, cracks, or signs of moisture inside the lens. If the tail-lights appear dim or flicker, it might be time to replace the bulbs or LED units.
Replacing tail-light bulbs on a 2012 Mitsubishi Lancer is generally straightforward. Most models use standard bulb types accessible by opening the tail-light housing from inside the boot or trunk space. Care should be taken to ensure the vehicle is off and the bulbs are cool before replacement. It's a good idea to use original or high-quality replacement bulbs to maintain light output and longevity.
When replacing tail-light assemblies or lenses, it is important to source parts that fit accurately and meet safety standards. Poorly fitting or low-quality components may not seal correctly, allowing water to enter and cause electrical issues or corrosion. For anyone unsure about the installation process, getting help from a qualified mechanic or auto electrician is recommended.
The use of LED tail-lights has become more common in many vehicles including some versions of the Mitsubishi Lancer. LEDs generally last longer, consume less power, and provide brighter illumination compared to traditional bulbs. If upgrading to LED tail-lights, ensure the new units are compatible with the vehicle's electrical system and lighting controls.
Aside from bulb replacement, tail-light lenses should be kept clean and free from scratches or cloudiness. Dirty or faded lenses can reduce light output and visibility, which is crucial for safe driving. Regularly washing the rear lights with appropriate cleaning products and polishing scratched lenses can help maintain their effectiveness.
Electrical connections within the tail-light system also warrant attention. Corrosion or loose wiring connections can cause intermittent failures or complete light outages. During vehicle servicing, it's beneficial to have these connections inspected and cleaned if necessary to ensure reliable operation of the tail-lights.
In a nutshell, tail-lights are a fundamental safety feature on the 2012 Mitsubishi Lancer. Proper maintenance and timely replacement keep the vehicle visible and compliant with road laws. Whether it is a bulb change, cleaning, or lens replacement, keeping the tail-lights in top shape helps prevent accidents and contributes to a safer driving experience for everyone on the road.