Your Selected Vehicle
Parts for your 2012 Mitsubishi Lancer-Headlight bulbs
Explore 4WD & Adventure
OEX Crimp Terminal Female Blade Red Terminal Entry 6.3 X 0.8mm Vinyl 18 Pce - ACX3016BL
Fitment Notes:
OEX 3mm 5 Core Trailer Cable, With Black Sheath - 500m Roll (NZ Ref.205T) - ACX0813/500
Fitment Notes:
Maintaining Your 2012 Mitsubishi Lancer Headlight Bulbs
The headlight system of your 2012 Mitsubishi Lancer is crucial to ensure safe driving, especially during the night or poor weather conditions. This vehicle typically uses either H11 bulbs for the low beams and 9005 bulbs for the high beams, both of which are halogen. Ensuring these bulbs function correctly is an integral part of your vehicle's maintenance. Over time, headlight bulbs can lose efficiency, resulting in decreased visibility which can compromise safety. Whether you're noticing dimming lights or it's just time for a routine check-up, replacing your headlight bulbs is a straightforward process you should be comfortable with.
- Firstly, gather the necessary tools. While replacing a headlight bulb is quite simple, having a set of basic hand tools can be helpful in case you need to remove any covers or components to access the bulbs.
- Before you begin, ensure that your car is turned off, the keys are removed from the ignition, and the headlights are turned off. This helps prevent any electrical shocks and makes it easier and safer for you to work.
- Next, locate the headlight housing at the front of your vehicle. In the Lancer, you will find the backside of the headlight unit accessible under the hood. You may need to remove the protective cap to reveal the bulb and its connector.
Now here comes the unscrewing part. Carefully disconnect the wiring harness that powers the bulb. This usually involves pressing a small tab to release the connector. Once disconnected, unscrew or unclip the bulb from the housing. It's a good idea to have a clean cloth or gloves handy to avoid touching the new bulb directly - oil from your skin can significantly reduce the lifespan of halogen bulbs.
- Handle the new bulb with care as you install it back in the housing. The procedure is just a reverse of removal: place the new bulb in the socket, screw or clip it back in, and reconnect the wiring harness securely.
- Before you close the bonnet, it's wise to test the new bulbs. Turn your car back on and activate the lights to ensure they are working correctly. This immediate test helps avoid the hassle of re-assembling everything only to find the bulb isn't functioning.
- Finally, replace any covers or parts you might have removed earlier and ensure everything is secured back in its place.
Regularly inspecting your headlight bulbs can greatly improve your driving visibility and safety. Even if one bulb is working, it's often recommended to replace them in pairs. This keeps the light output more uniform and reduces the chances of you having another bulb blow out on your next journey. Keep an eye out for signs that your headlights might be burning out, like dim lighting or inconsistent brightness. Paying attention to these details can make night drives much more comfortable and secure.
