Parts for your 2012 Honda Accord-Gas struts

2012 Honda Accord gas struts — are they used on this model?

Short answer: factory gas struts aren’t fitted to the 2012 Honda Accord sedan or coupe for the bonnet or the boot. Technical sources back this up. The 2012 Honda Accord Owner’s Manual specifies a support rod to hold the bonnet open, not gas struts (Bonnet/Hood section). Honda’s service information and parts catalogues for the 2008–2012 Accord body show torsion bar springs on the boot/trunk hinges, with no gas-lift supports (Body – Trunk/Boot Lid section). Some overseas Accord Tourer/Euro wagon variants use gas struts on the tailgate, but that body style wasn’t part of the mainstream 2012 Accord sedan/coupe offered locally.

Why didn’t Honda use gas struts here? A few practical reasons:

• Simplicity and reliability: a prop rod and torsion bars are robust, proven and rarely fail.
• Weight and cost: skipping gas struts saves a bit of mass and keeps build and service costs down.
• Packaging: torsion bars free up boot aperture space, and a prop rod is easy to package under the bonnet.

For owners keen on hands‑free lifting, aftermarket bonnet gas-strut kits exist for the 2012 Accord. These generally use bolt‑on brackets to existing points, though some kits require drilling. If fitting a kit, it’s smart to:

• Choose a model‑specific kit with corrosion‑resistant hardware and correct force rating (so the bonnet isn’t over‑stressed).
• Check clearance around the hinges and bonnet edges to avoid panel misalignment or paint rub.
• Follow torque specs and recheck fasteners after a few hundred kilometres.

Because the factory boot uses torsion bars, there’s no routine gas‑strut servicing needed there. If the boot lid won’t stay up or feels heavy, a technician can inspect hinge condition and adjust or replace the torsion bars. These bars are preloaded spring steel, so adjustment is best left to a workshop with the right tools.

Technical sources referenced: 2012 Honda Accord Owner’s Manual (Bonnet/Hood operation describing a support rod), Honda Accord 2008–2012 Service/Parts information (Body – Trunk/Boot Lid showing torsion bar springs and no lift supports). These factory documents define the original equipment approach on this model.

Popular questions about 2012 Honda Accord gas struts

Do 2012 Honda Accords have gas struts on the bonnet or boot from factory?
No. The bonnet uses a manual support rod, and the boot is counterbalanced with torsion bars. That means there are no original gas-lift struts to replace during servicing on the sedan or coupe.

Can gas struts be retrofitted to the bonnet?
Yes, several aftermarket kits are available. A vehicle-specific kit that uses existing mounting points is preferable. Installation should ensure there’s no interference with the guard edges or hinges, and that the strut force suits the bonnet’s weight. If unsure, a workshop can fit and check alignment.

My boot lid won’t stay up — do I need new gas struts?
This model doesn’t have boot gas struts. A weak boot lid usually points to torsion bar wear, hinge issues, or misalignment. A technician can assess and, if needed, adjust or replace the torsion bars and check the hinges for play.