Parts for your 2012 Ford Escape-Brake hose

2012 Ford Escape Brake Hose — Purpose, Care and When to Replace

Based on factory documentation, a brake hose is absolutely used on the 2012 Ford Escape. The Ford Workshop Manual (2012 Escape, Section 206-00 Brake System) specifies flexible hydraulic brake hoses at each front caliper and at the rear axle (with additional short hoses where rear disc brakes are fitted). This is echoed by the Ford/Motorcraft service parts catalogue listings for front and rear brake hoses on the 2012 model.

On this Escape, the brake hose is the flexible link that carries pressurised brake fluid from the rigid chassis lines to the moving bits — steering knuckles up front and the rear axle assembly. It has to flex constantly with suspension travel and steering, while maintaining strength and sealing. Quality hoses use an EPDM inner tube with reinforced braiding and crimped fittings