Your Selected Vehicle
Parts for your 1999 Ford Mondeo-Pedal pads
Explore 4WD & Adventure
1999 Ford Mondeo pedal pads
Pedal pads are absolutely used on the 1999 Ford Mondeo (Mk2). Technical sources including the Ford Mondeo 1996–2000 Owner’s Manual, the Ford TIS/ETIS parts catalogue for Mk2 Mondeo, and the Haynes Workshop Manual (Mondeo 1993–2000) show and list rubber covers on the brake and clutch pedals, the accelerator is typically an integral plastic pedal without a separate rubber pad.
On a ’99 Mondeo, the brake and clutch pedal pads do the simple but critical job of giving the driver dependable, non-slip grip under foot. They’re the textured rubber covers that sit over the metal pedal faces, helping maintain pedal feel in the wet, with muddy boots, or after a long commute. They also help the car meet safety rules in Australia and New Zealand that expect non-slip pedal surfaces for roadworthy/WoF checks.
Because they’re rubber, they wear. Over time they glaze smooth, crack, harden, or even work loose. That’s the cue to replace them—usually a quick DIY job that takes minutes and costs very little. Many Mondeo owners swap them in pairs so pedal feel stays consistent left to right.
- When to replace: if the pattern is smooth or shiny, edges are rounded, rubber is cracked, or the pad can be twisted on the pedal.
- Service tip: check pedal pads at every service or about every 20,000 km, and before WoF/roadworthy inspections.
How to fit new pads on a 1999 Mondeo brake or clutch pedal:
- Park safely, handbrake on, engine off. Wipe down the pedals.
- Peel off the old rubber pad from one corner.
- Inspect the bare metal pedal for rust or oil, clean and dry thoroughly.
- Warm the new pad in hot water for a minute to make it more pliable.
- Hook the bottom lip on first, then stretch over the top until the pad snaps around all edges. Check it’s fully seated.
Choosing parts is straightforward: stick with quality OEM or equivalent rubber pads that match the Mondeo Mk2 pedal shape. Avoid hard plastic covers—they don’t grip well and can be unsafe. After fitting, do a quick driveway test with dry and damp soles to confirm solid, predictable grip. Keeping good pedal pads is a small job that makes a big difference to braking confidence and clutch control.
Popular questions about 1999 Ford Mondeo pedal pads
Do all three pedals on a 1999 Mondeo have replaceable rubber pads?
The brake and clutch do, the accelerator is usually an integral plastic pedal without a separate rubber cover. If the throttle pedal surface is damaged, the complete pedal assembly or face plate is typically replaced rather than a slip-on pad.
Will worn pedal pads fail a WoF or roadworthy inspection?
They can. Excessively worn, smooth, or missing brake/clutch pedal pads may be flagged for lack of anti-slip surface. Replacing them before inspection is quick, inexpensive, and removes that risk.
How long do Mondeo pedal pads last?
It depends on driving conditions and footwear, but many owners see several years out of a set. City stop–start or wet, muddy use shortens life. Check them at every service and replace when grip isn’t crisp.
