Your Selected Vehicle
Parts for your 2011 Toyota Bb-Headlights
Narva Low Profile High Powered 3 LED Strobe/Warning Light Amber 12V/24V - 85203A
Fitment Notes:
LED Autolamps 90 Series Amber Emergency LED Strobe/Warning Light 12V/24V Surface Mount - 90AM
Fitment Notes:
Explore 4WD & Adventure
Narva Model 63 Front End Outline Marker, Side Indicator (Amber) Or External Cabin Marker Lamp Black Base And 0.5M Cable
Fitment Notes:
OEX 4mm Twin Core Automotive Cable, Red/Black, With Black Sheath - 5m Blister Pack (NZ Ref.153) - ACX0808-5BL
Fitment Notes:
OEX Mini Relay 12V 5 Pin Change Over 30/40A (30 & 86 terminals are reversed) Resistor Protected, Sealed - ACX1938RBL
Fitment Notes:
OEX 3mm Dual Wall Heat Shrink Polyolefin with Adhesive Tubing Black 1.2M - ACX1289L
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable, Bulk Pack Of 4 - 97010-1/4
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail and direcion indicator and reverse lamp with in built retro reflector and 0.5m hard wired cable - 97310
Fitment Notes:
Stedi Hyper LED Flood Lights 14 Inch 120W 6000K Colour 10800 Lumens - LEDHYPR-14-120W
Fitment Notes:
OEX 2mm Twin Core, Tinned Marine Cable, Red/Black with White Sheath, 100m Roll - ACX0985L
Fitment Notes:
Maintaining and Replacing Headlights on Your 2011 Toyota bB
The 2011 Toyota bB is a unique and compact vehicle known for its boxy design and practicality. One essential component for both safety and functionality in this model is the headlights. Regular maintenance and timely replacement of headlights ensure that you have a clear view of the road ahead, and that other drivers can see you clearly, especially in low-light conditions or adverse weather.
When it comes to servicing the headlights on your Toyota bB, there are a few key points to consider:
- Check for Clouding or Fogging: Examine the headlight lenses for any signs of clouding or fogging. This can happen over time due to exposure to harsh sunlight or constant road debris. If the lenses are cloudy, it might be worth restoring them using a headlight restoration kit.
- Test the Brightness: Periodically, it's a good idea to test the brightness of your headlights. Dim headlights can be caused by old bulbs, corrosion in the connectors or faulty wiring. Replacing aged bulbs and cleaning any corroded connectors can often restore brightness.
- Inspect for Bulb Failures: It's important to visually inspect the headlights regularly. If a bulb has burnt out, it needs to be replaced immediately to maintain visibility and avoid any potential fines for driving with a faulty headlight. Standard replacement processes for the Toyota bB are fairly straightforward, typically involving accessing the rear of the headlight assembly from under the bonnet.
- Select the Right Bulbs: When replacing the bulbs, ensure you select the right type. Referring to your owner's manual or consulting with a parts expert can help in choosing the correct replacement. There are options for higher-intensity discharge (HID) or LED bulbs which can offer better illumination if you're looking to upgrade.
- Regular Alignment: Sometimes, even if the bulbs and lenses are in top condition, the headlights themselves may not be aimed correctly. Misaligned headlights can reduce your night-time visibility and dazzle oncoming traffic. Headlight alignment can usually be checked and adjusted during regular servicing at your preferred auto shop.
By following these simple checks and maintenance routines, you ensure that your 2011 Toyota bB's headlights remain in optimal condition, providing safe and efficient lighting. Whether you're setting out on a long road trip or just commuting daily, keeping your headlights well-maintained is crucial for a hassle-free driving experience. Remember, good visibility is just as important for your safety as being visible to others on the road.