Parts for your 2011 Nissan Pulsar-Wiper refills

2011 Nissan Pulsar wiper refills

Wiper refills are relevant to the 2011 Nissan Pulsar sold in Australia and New Zealand. Nissan service literature and parts cataloguing for the C11 platform (the Pulsar/Tiida lineage in this model year) specify refillable front windscreen wiper assemblies, with genuine rubber inserts listed under 28895‑xxxxx part families. Owner’s and service manuals for these models reference replacing the “wiper blade rubber,” confirming that inserts, not only complete blades, are a supported service item.

On this car, wiper refills are simply the replaceable rubber inserts that slide into the existing wiper blade frames. They’re designed to restore clear vision without binning the whole blade assembly. That keeps costs down and reduces waste, while maintaining the original arm-and-frame fit that Nissan engineered for quiet, even contact on the glass.

As part of regular servicing, it’s worth inspecting the Pulsar’s wiper refills every 6–12 months. Aussie and Kiwi UV, heat, and road grime harden the rubber faster than cooler climates, so annual replacement is common, and twice-yearly if the car lives outside or drives coastal roads.

• Tell‑tale signs it’s time: streaks, chatter, missed patches, frayed edges, or a smeary haze even after a clean.
• Refills typically suit the factory hook‑type arms and OEM blade frames, lengths vary by body style, so match by VIN or measure each side before purchase.

Care tips between services: clean the windscreen regularly and wipe the blades with a damp cloth and mild wash solution. Avoid petroleum‑based cleaners on the rubber. Keep the washer system topped with proper screen wash, not plain water, to help cut road film.

1. Lift the arm, unclip the end stop on the blade frame, and slide out the old insert with its metal rails.
2. Transfer or fit the rails to the new rubber, then slide it into the frame channels until it locks against the end stop.
3. Check the blade tracks straight and reseat the clip. Gently set the arm back on the glass and test with washer spray.

If the Pulsar has had aftermarket beam blades fitted, refills may not be compatible—those usually require a complete blade swap. Otherwise, sticking with genuine or quality aftermarket refills keeps the factory look, quiet sweep, and clear wet‑weather vision the car was designed for.

Popular questions

Are wiper refills compatible with every 2011 Nissan Pulsar?
Generally yes for cars still running the original style hook‑arm blade frames. If someone has upgraded to one‑piece beam blades, use full replacement blades instead. Check the blade style and lengths on the car or confirm by VIN.

How often should the refills be replaced in Australia or New Zealand?
Plan on every 12 months, or sooner if the car is parked outdoors or sees lots of sun and salt air. If you notice streaking, chatter, or haze after cleaning, swap them out regardless of age.

Can the rear wiper use a refill as well?
Many hatch variants support a rear refill, but some rear blades are integrated and require a full blade. Inspect the rear blade for an end clip and channel, if present, a refill is usually available. Otherwise, replace the whole rear blade assembly.