Parts for your 2011 Nissan Pulsar-Drive belt

2011 Nissan Pulsar drive-belt: what it does and when to replace it

A drive-belt is absolutely used on the 2011 Nissan Pulsar. Technical references including Nissan’s factory service manuals for the C11 Tiida/Pulsar platform (sold in AU/NZ through this period) specify a V‑ribbed accessory drive-belt with inspection procedures and routing, and aftermarket catalogues from well-known belt manufacturers list a matching serpentine belt for HR16DE/MR18DE engines. That confirms this model runs an external accessory drive-belt.

On a 2011 Pulsar, the drive-belt (serpentine or V‑ribbed belt) spins the alternator and the air‑conditioning compressor. Some trims use electric power steering, so there’s no power-steering pump on the belt. The belt doesn’t replace the timing chain