Skip to content Skip to navigation menu

Your Selected Vehicle

Brands

Show More Show Less

Price

Parts for your 2011 Mitsubishi Lancer-Batteries

Sort by
Projecta Battery Tray 185 x 280mm - PBT100

Projecta Battery Tray 185 x 280mm - PBT100

$24
Fitment Notes:
See More
OEX Heat Shrink Standard Red ID: 4.5mm Length: 10m - ACX1272
OEX

OEX Heat Shrink Standard Red ID: 4.5mm Length: 10m - ACX1272

$57
Fitment Notes:
See More
Trisco Electric Oil Pressure Gauge - GO520

Trisco Electric Oil Pressure Gauge - GO520

$121
Fitment Notes:
See More
NOCO GB50 Jump Starter EVA Protective Case - GBC017

NOCO GB50 Jump Starter EVA Protective Case - GBC017

$53
Fitment Notes:
See More

Explore 4WD & Adventure

Drivetech 4x4 Heavy Duty Battery Box - DT-02008

Drivetech 4x4 Heavy Duty Battery Box - DT-02008

$308
Fitment Notes:
See More
OEX Standard Blade Fuse, 7.5A Brown - Pack of 5 - ACX1602BL
OEX

OEX Standard Blade Fuse, 7.5A Brown - Pack of 5 - ACX1602BL

$9
Fitment Notes:
See More
OEX Mini Blade Fuse, 20A Yellow - Pack of 5 - ACX1655BL
OEX

OEX Mini Blade Fuse, 20A Yellow - Pack of 5 - ACX1655BL

$9
Fitment Notes:
See More
Mechpro Jumper Leads 400A 2.5m - MPBCBL400
Clearance

Mechpro Jumper Leads 400A 2.5m - MPBCBL400

$25
Fitment Notes:
See More
OEX Battery Terminal Heavy Duty Wing Nut Pair - ACX0025BL
OEX

OEX Battery Terminal Heavy Duty Wing Nut Pair - ACX0025BL

$47
Fitment Notes:
See More
Stedi T1500 LED Task & Camp Light - LEDTASK-T1500

Stedi T1500 LED Task & Camp Light - LEDTASK-T1500

$149
Fitment Notes:
See More
OEX Flasher Relay, 3 Pin 12V - ACX1954BL
OEX

OEX Flasher Relay, 3 Pin 12V - ACX1954BL

$22
Fitment Notes:
See More
Narva 12V Relay 5 Pin 30/40A With Resistor - 68044BL

Narva 12V Relay 5 Pin 30/40A With Resistor - 68044BL

$36
Fitment Notes:
See More
Mechpro Red 150 Lumen COB LED Pen Light
Clearance

Mechpro Red 150 Lumen COB LED Pen Light

$2
Fitment Notes:
See More
OEX Computer Safe LED Circuit Tester 3-15V - ACX6202
OEX

OEX Computer Safe LED Circuit Tester 3-15V - ACX6202

$40
Fitment Notes:
See More
Mechpro 12v Socket Replacement - MPEA11

Mechpro 12v Socket Replacement - MPEA11

$8
Fitment Notes:
See More
Redarc Solar connector kit - SRC0001-CK

Redarc Solar connector kit - SRC0001-CK

$24
Fitment Notes:
See More
OEX Coloured Cable Tie Assortment - 1000 Pc - ACX1330
OEX

OEX Coloured Cable Tie Assortment - 1000 Pc - ACX1330

$54
Fitment Notes:
See More
Projecta EV Adaptor Type 1 to Type 2 - EVAPT1T2

Projecta EV Adaptor Type 1 to Type 2 - EVAPT1T2

$295
Fitment Notes:
See More
Milwaukee 4pc Hook and Pick Set - 48229215

Milwaukee 4pc Hook and Pick Set - 48229215

$29
Fitment Notes:
See More
CRC Engine Start 400ml - 5040
CRC

CRC Engine Start 400ml - 5040

$28
Fitment Notes:
See More
CTEK Battery Sense Bluetooth Battery Monitor - 40-149

CTEK Battery Sense Bluetooth Battery Monitor - 40-149

$220
Fitment Notes:
See More
OEX - LED Worklight 9 LED Flood beam square - ACX5704
OEX

OEX - LED Worklight 9 LED Flood beam square - ACX5704

$43
Fitment Notes:
See More
Showing 508 - 546 of 5976 products

Batteries in the 2011 Mitsubishi Lancer: What You Need to Know

The 2011 Mitsubishi Lancer, like most conventional vehicles, definitely comes equipped with a battery. It's an essential component, not just for starting the engine but also for powering the electrical systems that keep the car running smoothly. When it comes to the Lancer, the battery is there quietly doing its job behind the scenes, but without it, the car simply wouldn't function.

So what's the deal with the battery in your 2011 Mitsubishi Lancer? It's a lead-acid type battery, typically a 12-volt unit that stores electrical energy to start the engine and support all the electrical accessories and systems, including lights, radio, dashboard instruments, and more. The battery provides the initial power needed to kickstart the engine before the alternator takes over and supplies electricity while the car's running. Without a good, fully charged battery, you might find yourself stranded with a car that won't start.

One of the key things to remember is that the battery is not a 'set and forget' part. It needs regular checking, especially as the vehicle ages or if it's used in demanding conditions. Maintenance and care of the battery can extend its life, prevent unexpected failures, and keep the Lancer operating exactly as it was designed to.

When it comes to maintenance, the battery terminals on a 2011 Mitsubishi Lancer should be kept clean and free from corrosion. Corrosion buildup on the terminals can prevent a good electrical connection, leading to starting troubles and other electrical problems. Using a simple baking soda and water solution with a wire brush is a common way to keep the terminals clean. After cleaning, it's helpful to apply a protective spray or grease designed to stop corrosion coming back.

Battery health also depends on the vehicle's usage patterns. If the Lancer is driven frequently on long trips, the alternator generally keeps the battery charged effectively. However, frequent short trips that don't allow the battery to fully recharge, or long periods of inactivity, can cause the battery to discharge and eventually fail. So if the car isn't driven much, or sits idle for weeks at a time, it's a good idea to use a trickle charger or battery maintainer to keep it in good health.

Another crucial point is to check the battery's overall condition during regular servicing. A mechanic will typically test the voltage and performance of the battery using specialised tools. If the voltage is consistently low or the battery struggles to hold a charge, replacement is usually the best option. Batteries generally last around three to five years, but this varies depending on driving habits, climate, and overall vehicle condition.

Replacing a battery on a 2011 Mitsubishi Lancer is fairly straightforward, but it's important to choose the correct size and type to ensure compatibility. Using a battery with the right cold cranking amps (CCA) rating, physical dimensions, and terminal positions will help avoid any fitting issues or electrical problems. Most car parts stores stock batteries that suit the Lancer, and vehicle documentation usually details the recommended specifications.

Some practical tips for battery replacement or upkeep include:

  • Turning off all electrical accessories before removing the old battery to avoid short circuits.
  • Disconnecting the negative terminal first, then the positive, to prevent sparks.
  • Cleaning battery tray and terminals before installing the new battery.
  • Connecting the positive terminal first, then the negative when installing.
  • Properly disposing of the old battery at a recycling centre or retailer.

Keeping an eye on the battery's condition before it fails is the best way to avoid being caught out. Common signs a battery might need attention or replacement include slow engine crank, dimming headlights, warning lights on the dashboard, or a noticeably weak electrical system.

All in all, the battery on a 2011 Mitsubishi Lancer is a vital part that plays a huge role in both starting the car and powering its electrical systems. Treating it with a bit of care through regular checks and maintenance will make sure the Lancer keeps running reliably, no matter if it's a daily commute or a weekend trip. Ignoring battery health might seem minor, but it's often the cause of unexpected breakdowns and headaches, which nobody wants.