Parts for your 2011 Honda Cr-v-Pedal pads

2011 Honda CR‑V Pedal Pads

Pedal pads are relevant and fitted to the 2011 Honda CR‑V. Technical references including the Honda CR‑V 2007–2011 Service Manual (Brake System – Brake Pedal) and Honda’s Electronic Parts Catalogue for the 2011 model year identify a rubber brake pedal pad on all variants, with a separate rubber clutch pedal pad on manual models. The accelerator pedal uses an integral plastic/metal pedal face rather than a removable pad.

On this CR‑V, the pedal pads do a simple but critical job: they provide grippy, cushioned contact so shoes don’t slip off the brake or clutch, especially when wet or muddy. Over time, those rubber faces can harden, glaze, crack, or wear smooth, which reduces traction and can affect driver confidence under hard stops. Because they’re consumable, checking them is a smart part of regular servicing.

As part of routine maintenance in Australia and New Zealand conditions—think beach runs, farm tracks, or just wet winter commutes—it’s worth inspecting pedal pads at every service or about every 10,000 km. Keep them clean with mild soapy water and a soft brush, avoid harsh solvents that can dry out or swell the rubber. If the pad looks shiny, is thinning, cracked, or can shift on the pedal arm, it’s time to replace it. Replacement is quick: the rubber sleeve lip simply stretches over the pedal plate. Fitment should be snug with the lip fully seated all the way around.

• Visible glazing or smooth patches on the pad surface
• Cracks, splits, or chunks missing
• Pad feels hard or slippery when wet
• Any looseness or movement on the pedal

For automatic CR‑V models, this means the brake pedal pad only, for manuals, both brake and clutch pads are service items. Avoid stacking decorative metal covers over worn pads—they can reduce grip or foul floor mats. Also check mat placement, ensuring nothing can ride up under the pedals. Many roadworthy/WOF inspections can flag missing or excessively worn brake/clutch pedal pads, so keeping them tidy helps pass first go.

Genuine-equivalent rubber pads are inexpensive and fit correctly, maintaining the intended pedal feel. If the pedal plate itself is bent or corroded, replace or repair that before installing a new pad so the new rubber seats properly.

Does the 2011 Honda CR‑V have pedal pads?

Yes. It has a removable rubber brake pedal pad on all models, and a removable clutch pedal pad on manual models. The accelerator pedal face is integral and isn’t a separate pad.

How often should pedal pads be replaced on a 2011 CR‑V?

There’s no fixed kilometre interval—replace them when worn. Inspect at each service (about every 10,000 km). If the pad is smooth, cracked, hard, or loose, swap it out straight away for best grip and safety.

Can aftermarket pedal covers be used safely?

They can, but stick to quality covers that retain the original grip and don’t add excessive thickness. Ensure they don’t interfere with floor mats or pedal travel, and that the brake/clutch still have a firm, non-slip surface in the wet.