Your Selected Vehicle
Parts for your 2011 Honda Civic-Tail lights
Repco 12-24V LED Rear Combination Lamp Stop/Tail/Ind/Rev 100X275X22mm - RLT275STIR
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable - 97010-1
Fitment Notes:
LED Autolamps 355 Series Multi Volt Black Stop/Tail/Indicator/Reverse/Reflector LHS & RHS Twin Blister Pack - 355BARWM-2
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator/Reverse Assembly Clear Lens Chrome Bracket - 82CARW
Fitment Notes:
LED Autolamps 12/2V Maxilamp LED Stop/Tail/Indicator/Reflector Black Chrome Bolt Mount - MAXILAMPC1XCE
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator With 18 Square LEDs Twin Blister - 135ARM/2
Fitment Notes:
Explore 4WD & Adventure
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly With 123 LEDs - 100BARWM
Fitment Notes:
Stedi C-4 Black Edition LED Light Cube Diffused Pattern 4 LED Work Light - LEDWORK-C4-DIFFUSE
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse/Reflector Mini Jumbo Twin Blister - 420ARRWM2
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator/Reverse Assembly Chrome Bracket Blister Pack - 82CARRW
Fitment Notes:
LED Autolamps RHS, Stop/Tail/SEQ-Indicator/Reverse/Reflector 12/24V 284 X 100 X 37mm, DT04 Connector - SO284RHS
Fitment Notes:
Stedi C-4 Black Edition Flush Mount 4 LED Work Light Flood Beam - LEDFLUSH-C4-FLOOD
Fitment Notes:
LED Autolamps MultiVolt R.H.S Stop/Tail/Indicator Assembly 128 Round LEDs - 125BARMR
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Assembly 72 LEDs With Black Bracket - 200BARM
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Assembly 72 LEDs With Black Bracket 190x100x28mm - 80BARM
Fitment Notes:
Narva 9-33 Volt LED Reverse (White) With Red LED Tail Ring, 155mm Contoured Chrome Cover - 95628
Fitment Notes:
LED Autolamps LHS, Stop/Tail/SEQ-Indicator/Reverse/Reflector 12/24V 284 X 100 X 37mm, DT04 Connector - SO284LHS
Fitment Notes:
9-33 Volt LED Reverse, Rear Direction Indicator and Stop Lamps with LED Tail Rings - 94365C
Fitment Notes:
LED Autolamps Rear Taillight Harness To Suit MY22 Ranger / MY20 Ram Plug To Bare Wires - PATCH-RAM.UNI
Fitment Notes:
9-33 Volt LED Rear Direction Indicator and Twin Stop Lamps with LED Tail Rings - 94364C
Fitment Notes:
LED Autolamps 385 Series Rear Combination Lamp LHS with 7 core plug - 385ARWMLCSB
Fitment Notes:
Maintaining and Replacing Tail Lights on Your 2011 Honda Civic
Tail lights play a crucial role in ensuring your 2011 Honda Civic is visible to other drivers, especially during night-time driving or adverse weather conditions. These lights help communicate your intentions to stop or turn to other roads users, thus enhancing safety on the road. Over time, just like any other component, tail lights can suffer from wear and tear, leading to a need for maintenance or replacement. Let's guide you through understanding and managing your Honda Civic's tail lights.
Routine maintenance of your Civic's tail lights should be part of your regular vehicle check-up. Conducting visual inspections frequently is the first step. This involves checking for any cracks, condensation, or dirt build-up on the exterior of the tail lights. If you notice any signs of damage or if the brightness seems dimmer than usual, it might be time for a deeper inspection or replacement.
The tail lights on the 2011 Honda Civic utilise a combination of incandescent bulbs and LEDs. Unlike the LEDs which tend to last longer, the incandescent bulbs may need more frequent attention due to filament burnout. You can test the status of your bulbs by initiating signals such as brake press or turning the indicators on. It's advisable to conduct these tests with the help of a friend or by parking in front of a reflective surface so you can see the lights' status from the driver's seat.
If a bulb replacement becomes necessary, it's a relatively straightforward task that most Civic owners can carry out themselves without visiting a mechanic. You'll need a new bulb, a screwdriver, gloves to protect your hands, and possibly owners' manual for guidance. Before proceeding, make sure your car is parked safely, with the engine off, and tail lights switched off to avoid any risk of electric shock.
- Open the boot of your Civic and locate the tail light assembly. In most cases, it's accessed from inside the boot, through a removable panel.
- Use the screwdriver to remove any screws or clips holding the panel or cover in place. Be subtle to prevent any damage to the panel.
- With the assembly exposed, find the socket that holds the bulb you need to replace. Carefully twist the socket counter-clockwise to release it from the tail light assembly.
- Gently remove the bulb by pulling it straight out. When handling new bulbs, it's good practice to wear gloves to avoid oils from your hands causing damage or reducing the lifespan of the bulb.
- Insert the new bulb into the socket. Once firmly in place, reconnect the socket to the tail light assembly by twisting it clockwise.
- Test the new bulb by turning on the ignition and activating the tail lights.
- Reattach the panel or cover securely and close the boot.
For maintenance, keeping your tail lights clean is another simple yet effective task. Dust and grime can accumulate over time, affecting the brightness of the lights. Cleaning them can be as simple as a wipe down with a damp cloth and a mild cleaning solution. Ensure that the surface is dry to prevent moisture from getting trapped, potentially leading to electrical issues.
Electrical issues might arise if the connectors or wires become corroded or loose. Should you experience persistent problems like flickering or non-operational lights despite bulb replacements, it may indicate an underlying electrical fault. In such cases, engaging a professional mechanic for a more thorough inspection is a wise choice to prevent further issues.
Lastly, consider the aesthetics. Over time, the plastic cover of the tail lights may become cloudy or scratched, diminishing their effectiveness. You can restore some clarity using a restoration kit designed specifically for headlight or tail light lenses, which involves a process of sanding and buffing to remove the top layer of the plastic.
Taking the time to ensure the proper function and maintenance of your 2011 Honda Civic's tail lights not only enhances safety but can also have a positive impact on the vehicle's overall appearance and value. Always remember, proactive care will prevent bigger issues down the road and ensure your car maintains its reliability for many kilometers ahead.