Your Selected Vehicle
Parts for your 2011 Ford Fiesta-Headlights
LED Autolamps Multi Volt Stop/Tail Lamp With Rubber Grommet And Plug - 164RM
LED Autolamps 12/24V Reverse Lamp Horizontal/Vertical Mount Twin Blister - 11WM-2
LED Autolamps 12/24V Cat6 Side Direction Indicator Clear Lens Blister Pack - 77ACM
LED Autolamps 12/24V Front End Outline Marker Recessed Fitting Twin Blister - 7922WM2
Explore 4WD & Adventure
LED Autolamps 24V Front Indicator And Park Light Chrome Bezel Blister Pack - 285CAW24
LED Autolamps 12V Stop/Tail/Indicator/Licence Plate Lamp With Reflector - 149BARL4P
LED Autolamps 174 Series Stop/Tail/Indicator Lamp 12/24V, Surface Mount, 40cm Cable - 174ARMB
LED Autolamps 174 Series Stop/Tail Lamp 12/24V, Surface Mount, 40cm Cable - 174RMB
LED Autolamps 174 Series Reverse Lamp 12/24V, Surface Mount, 40cm Cable - 174WMB
LED Autolamps Licence Plate Lamp Black Bracket Multi Volt With 1m Cable - 35BLM1P
LED Autolamps 10/30V LED Side Direction Indicator Light With 30cm Wire - 35AMB
LED Autolamps 12V Stop/Tail Lamp Black Chrome Round With Clear Lens - 102RBC
LED Autolamps 12V 82 Series Stop/Tail/Indicator/Reverse Lamp Black Bracket - 82BARW
LED Autolamps Multi Volt Stop/Tail/Indicator With 18 Square LEDs Twin Blister - 135ARM/2
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly 3 Lamps With 153 LEDs - 125BARWM
LED Autolamps 12/24 Multi Volt Stop/Tail/Indicator/Reverse Assembly Lamp With 108 LEDs - 80BARWM
LED Autolamps 12V Front Indicator Amber Lens Black Base Twin Blister Pack - 175A/2
LED Autolamps LHS, Stop/Tail/SEQ-Indicator/Reverse/Reflector 12/24V 284 X 100 X 37mm, DT04 Connector - SO284LHS
2011 Ford Fiesta headlights
Headlights are absolutely fitted to the 2011 Ford Fiesta and are central to its road-legal lighting system. This is supported by the Ford Fiesta Owner’s Manual (2011 model year), the Ford WS/WT Fiesta workshop literature, and local standards such as ADR 13/00 (Australia) and NZTA Warrant of Fitness guidance, all of which specify mandatory dipped and main-beam headlamps for safe night and low‑visibility driving.
On this Fiesta, the headlights do the heavy lifting after dark: dipped beam handles everyday driving without dazzling others, while high beam throws light further down the road on unlit stretches. Clear, correctly aimed lamps help the driver spot hazards early, read road signs, and be seen by others in rain, fog, or twilight. Because most 2011 Fiestas use halogen bulbs, light output naturally fades over time, so keeping them fresh is a simple way to restore night-time confidence.
As part of routine servicing, it’s worth giving the headlights a quick once‑over. If one side’s gone, the other likely isn’t far behind—replacing in pairs keeps the beam colour and brightness even. Avoid touching the bulb glass with bare fingers, oil residue can shorten bulb life. If there’s misting inside the lens that doesn’t clear after a drive, check the rear caps and seals for damage. Yellowed or hazy lenses can often be restored with a plastic headlight polish kit, that small effort can bring back lost brightness.
Correct aim matters just as much as brightness. A low beam that’s set too high will dazzle oncoming traffic, too low and the car outruns its light. After any front‑end work—or if the Fiesta’s been loaded differently—have the aim checked with a beam setter to ADR/NZTA guidelines. If a headlight is out completely, don’t forget the basics: check the relevant fuse, verify the connector is snug, and inspect the wiring for corrosion near the lamp housing.
For bulb specification and access steps, the owner’s manual for the 2011 Fiesta is the go‑to. If upgrading to LED or higher‑output bulbs, confirm they’re compliant and correctly focused in the Fiesta’s housing to stay legal for rego or WoF.
- Inspect lenses and operation at every service or 10,000 km.
- Replace bulbs in pairs, carry a spare on longer trips.
- Check seals and aim after any front‑end repair or impact.
Popular questions about 2011 Ford Fiesta headlights
What headlight bulb type does a 2011 Ford Fiesta use?
Bulb type can vary by trim and market. Many 2011 Fiestas use halogen bulbs with separate low and high beams, but the exact spec is listed in the owner’s manual and on the lamp housing. When replacing, match the original type and avoid touching the glass. If considering LED replacements, make sure they’re road‑legal and correctly focused in the factory housing.
How can someone tell if the Fiesta’s headlights need re‑aiming?
Signs include other drivers flashing you, a dark foreground with a bright sky patch, or one beam pattern sitting higher than the other against a wall. After suspension, bumper, or headlight housing work, have the aim checked with a beam setter to meet ADR/NZTA requirements and avoid WoF or rego issues.
How often should headlight bulbs be replaced?
There’s no fixed interval—replace when dim, discoloured, or failed. Halogen bulbs often lose output gradually after a couple of years. Replacing in pairs restores balanced light and colour temperature, and keeping a spare on hand saves hassle on road trips.