Your Selected Vehicle
Parts for your 2010 Lexus Is-Headlights
Explore 4WD & Adventure
OEX 2mm Twin Core Automotive Cable, Red/Black, With Black Sheath - 50m Roll (NZ Ref. 147) - ACX0799
Narva Rotary Battery Master / Isolator Switch With Removeable Keyed Knob (Contacts Rated 100A @ 12V) - 61036BL
Narva Battery Master / Isolation Switch Plastic With Removable Key (Contacts Rated 100A at 12V) - 61038
OEX 4mm Twin Core Automotive Cable, Red/Black, With Black Sheath - 10m Blister Pack (NZ Ref.153) - ACX0808-10BL
2010 Lexus IS headlights
Headlights are absolutely fitted to the 2010 Lexus IS and are essential equipment. Technical documentation such as the 2010 Lexus IS Owner’s Manual, Lexus New Car Features (NCF) for the XE20 series, and the Toyota/Lexus Electronic Parts Catalogue confirm the model was supplied with projector headlamps in two main variants: halogen (commonly H11 low beam with HB3/9005 high beam) or HID/Xenon (commonly D4S low beam) on higher trims, with some vehicles featuring Adaptive Front-lighting System (AFS) and headlamp washers. Australian Design Rules (ADR) and NZTA lighting regulations also require compliant forward lighting, so headlights are very much relevant to this vehicle.
On the 2010 IS, the headlights provide safe forward visibility at night and in poor weather, help others see the vehicle, and, on HID/AFS models, can actively improve cornering visibility. Clear lenses and correct beam aim are crucial to avoid glare and to pass a WOF/roadworthy check.
For servicing, there’s no fixed replacement interval, but bulbs should be changed when output drops or a lamp fails. Halogen globes tend to dim with age