Your Selected Vehicle
Parts for your 2010 Holden Captiva 5-Oil filter
Explore 4WD & Adventure
2010 Holden Captiva 5 Oil Filter
Yes, the 2010 Holden Captiva 5 is fitted with an engine oil filter. Technical sources including the GM Holden Captiva CG Series I Workshop Manual (Engine Mechanical – Lubrication), GM/ACDelco parts catalogues for the 2.4‑litre petrol and 2.0‑litre diesel engines, and major filter manufacturer fitment guides all specify a replaceable oil filter element for these engines. On the Captiva 5, it’s a cartridge-style filter housed in a reusable cap on the engine, rather than a traditional spin‑on canister.
That oil filter quietly does the heavy lifting every time the Captiva 5 heads out. Its job is to trap carbon, metal particles and sludge so the oil can keep bearings, camshafts and turbo (on diesel models) properly lubricated. Clean oil helps maintain stable oil pressure, reduces wear, and keeps the engine running smoother and more efficiently for longer.
As part of routine servicing, changing the oil filter with every engine oil change is smart practice. For most Aussie and Kiwi driving, that means every 10,000–15,000 kilometres or 12 months, whichever comes first. Short trips, towing, dusty roads or lots of stop‑start commuting? Bring it forward, because harsher use loads the filter faster. Always replace the cap O‑ring that comes with the new element and lightly oil it before installation so it seals properly.
- Why it matters: Cleaner oil means less wear, better fuel economy and fewer expensive surprises.
- Recommended timing: 10,000–15,000 km/12 months, or sooner in severe service conditions.
- Quality counts: Choose a reputable filter that meets GM/Holden specs for the Captiva 5 engines.
- Under the bonnet, remove the engine cover to access the filter housing (top‑mounted on the 2.4 petrol, similar accessible housing on the 2.0 diesel).
- Drain the engine oil, then undo the filter cap with a suitable cap wrench. Swap the cartridge and O‑ring.
- Refit the cap, torqued to spec, refill with the correct oil grade and quantity, then check for leaks and reset the service reminder.
Signs the filter and oil are past their best include a noisy cold start, darker‑than‑usual oil immediately after a change, or an oil pressure warning. If any of that pops up, it’s time to book a service. Dispose of used oil and filters responsibly at a recycling point.
Popular questions
What type of oil filter does a 2010 Holden Captiva 5 use?
The Captiva 5 uses a cartridge-style oil filter element that sits in a reusable housing. Both the 2.4‑litre petrol and 2.0‑litre diesel engines use this style. Always install the new O‑ring supplied with the element.
How often should the oil filter be changed on a Captiva 5?
Replace the oil filter at every oil change—typically every 10,000–15,000 km or 12 months. If the vehicle tows, does lots of short trips, or drives in dusty conditions, change it more frequently.
Where is the oil filter located on the Captiva 5?
It’s in a black plastic or alloy housing on the top/front of the engine, under the engine cover. A cup‑type filter wrench makes removal tidy and avoids damage to the cap.
