Parts for your 2010 Ford Mondeo-Wheel hubs

2010 Ford Mondeo wheel hubs — what they do and when to replace them

Wheel hubs are absolutely used on the 2010 Ford Mondeo. Technical sources including the Ford ETIS/Workshop Manual (Front Suspension and Rear Drive Axle sections), the Haynes Mondeo 2007–2014 manual, and SKF/Motorcraft hub and bearing catalogues identify hub-and-bearing assemblies front and rear on this model. The front typically uses a pressed-in bearing with a hub flange in the steering knuckle, while the rear is a bolt-on hub unit on disc-brake variants, each with an integrated ABS encoder.

On a 2010 Mondeo, the wheel hub is the solid foundation that the wheel bolts to. It supports the vehicle’s weight through the bearing, keeps the wheel running true, and provides the mounting face for the brake disc. The bearing is sealed-for-life, so there’s no greasing or adjustment—when it wears, the whole hub/bearing assembly is replaced. The ABS wheel speed signal is usually read from a magnetic encoder in the hub, so a failing hub can also trip the ABS light.

During routine servicing, it’s smart to check for play, roughness and noise. Spin each wheel and listen for a humming or growl that rises with speed