Skip to content Skip to navigation menu

Your Selected Vehicle

Brands

Show More Show Less

Price

Parts for your 2010 Ford Falcon-Headlight bulbs

Sort by
Adhesive PVC Insulation Tape - 56830BK
30%OFF

Adhesive PVC Insulation Tape - 56830BK

$4.20
$6
Fitment Notes:
See More
Adhesive PVC Insulation Tape - 56820BK
30%OFF

Adhesive PVC Insulation Tape - 56820BK

$4.20
$6
Fitment Notes:
See More
Adhesive PVC Insulation Tape - 56830RD
30%OFF

Adhesive PVC Insulation Tape - 56830RD

$4.20
$6
Fitment Notes:
See More

Explore 4WD & Adventure

Adhesive PVC Insulation Tape - 56820RD
30%OFF

Adhesive PVC Insulation Tape - 56820RD

$4.90
$7
Fitment Notes:
See More
Sellotape PVC 18mm x 20m Black
30%OFF

Sellotape PVC 18mm x 20m Black

$5.60
$8
Fitment Notes:
See More
OEX Favourite Fuse Assortment Kit - 169pcs - ACX1737
OEX

OEX Favourite Fuse Assortment Kit - 169pcs - ACX1737

$46
Fitment Notes:
See More
OEX H4 Head Light Connector - ACX2583
OEX

OEX H4 Head Light Connector - ACX2583

$12
Fitment Notes:
See More
OEX Blue Nylon Cable Ties - 4.8mm x 200mm - 100 Pc - ACX1461
OEX

OEX Blue Nylon Cable Ties - 4.8mm x 200mm - 100 Pc - ACX1461

$16
Fitment Notes:
See More
OEX Spiral Wrap ID: 6mm - 10m Roll - ACX1182
OEX

OEX Spiral Wrap ID: 6mm - 10m Roll - ACX1182

$13
Fitment Notes:
See More
OEX Mega Fuse, 40A Bolt On - Pack of 5 - ACX6518
OEX

OEX Mega Fuse, 40A Bolt On - Pack of 5 - ACX6518

$54
Fitment Notes:
See More
OEX Relay Base Suits 4 or 5 Pin Relays - ACX1997BL
OEX

OEX Relay Base Suits 4 or 5 Pin Relays - ACX1997BL

$10
Fitment Notes:
See More
OEX Head Lamp / Dip Switch On - On - SPDT - ACX3450
OEX

OEX Head Lamp / Dip Switch On - On - SPDT - ACX3450

$45
Fitment Notes:
See More
Hella Air Horn 12V 117dB - 6014

Hella Air Horn 12V 117dB - 6014

$96
Fitment Notes:
See More
OEX Standard Blade Fuse, 15A Blue - Pack of 5 - ACX1604BL
OEX

OEX Standard Blade Fuse, 15A Blue - Pack of 5 - ACX1604BL

$7
Fitment Notes:
See More
Showing 1 - 39 of 3223 products

2010 Ford Falcon Headlight Bulbs Replacement and Maintenance

The 2010 Ford Falcon is equipped with specific types of headlight bulbs best matched for providing clear visibility while driving at night or during poor weather conditions. Recognising signs of wear and ageing in the headlights is crucial, as proactive replacement or servicing significantly enhances driving safety. This guide focuses on the replacement and maintenance of headlight bulbs for your Falcon, ensuring you can confidently tackle any issues that arise.

First, it's essential to understand what type of headlight bulbs are used in the 2010 Ford Falcon. The vehicle typically comes with halogen bulbs, known for their durability and efficiency. Halogen bulbs are a popular choice for many vehicles, offering a blend of brightness and affordability. However, like all automotive bulbs, over time they will dim, flicker, or burn out, necessitating replacement. Let's explore the signs and steps involved in replacing these bulbs to keep your driving experience safe and enjoyable.

  • Signs of Headlight Bulb Wear:
    1. Dim or Flickering Lights: When headlights are not as bright as they use to be, it signals the bulbs may need replacement. Flickering might occur due to poor bulb connection or filament wear.
    2. Burning Smell: A faint burning smell near the headlamp housing indicates a bulb is on its last leg.
    3. Discolouration: Noticeable changes in the light's colour, such as a shift from white to yellow, suggest that the bulb's glass may have started to age or burn.

When any of these signs are observed, follow the guidance below to replace your Falcon's headlight bulbs.

  • Replacing the Headlight Bulbs:
    1. Choose the Right Bulb Type: It's vital to purchase the correct bulb type specified for your 2010 Ford Falcon. Check your owner's manual or the old bulb for part numbers.
    2. Tools and Preparation: Before starting, make sure you have the new bulbs, as well as necessary tools like a screwdriver and gloves to prevent oils from your skin from touching the glass of the new bulbs.
    3. Access the Headlight Assembly: Open the bonnet and locate the back of the headlight assembly. On the Falcon, you often don't need to remove the entire headlight assembly, as the bulb can typically be changed through the engine bay.
    4. Removing Old Bulbs: Disconnect the power wire from the bulb. Unscrew or unclip the bulb holder, then gently pull out the old bulb. Take note of how the old bulb is positioned as the new bulb will need to be installed in the same way.
    5. Install New Bulbs: Without touching the glass, place the new bulb into the socket, mirroring the position and angle of the old bulb. Secure the bulb with clips or screws, then reattach the power wire.
    6. Test and Adjust: Once installed, power on your headlights to ensure the new bulb is working. If needed, adjust the headlight position to ensure it is properly aimed and provides optimal visibility.

Completing these steps will ensure your headlights are restored to their full luminosity. However, regular maintenance can prolong the life of your headlight bulbs.

  • Maintaining Your Headlight Bulbs:
    1. Clean Regularly: Dirt and debris can accumulate on headlamp housings, reducing luminous output. Use a headlight cleaning kit or a mixture of baking soda and water for a DIY approach.
    2. Inspect for Moisture: Ensure the housing remains sealed to avoid moisture, which can reduce bulb efficacy and potentially cause bulb failure.
    3. Prevent Vibration: Loose fittings can cause bulbs to burn out quicker. Ensure all headlamp components are properly secured.
    4. Check Electrical Connections: Wires and connectors should be checked periodically for corrosion or signs of wear, ensuring they are transmitting power effectively to the bulbs.

Maintaining the headlight bulbs of your 2010 Ford Falcon is essential for safe driving. Being proactive about inspecting, cleaning, and, if necessary, replacing the bulbs will keep your vehicle ready for any condition. The process is straightforward and contributes to the car's performance and aesthetics. Happy driving!