Skip to content Skip to navigation menu

Your Selected Vehicle

Brands

Show More Show Less

Price

Parts for your 2010 Ford Falcon-Headlight bulbs

Sort by
Narva Cable Lug 25mm2 8mm Stud Flared End - 57129

Narva Cable Lug 25mm2 8mm Stud Flared End - 57129

$6
Fitment Notes:
See More
Halogen Work Light Square Flood Beam - 72410
Clearance

Halogen Work Light Square Flood Beam - 72410

$10
Fitment Notes:
See More

Explore 4WD & Adventure

Cole Hersee Continuous Duty Solenoid 12V 200A - 24213BX

Cole Hersee Continuous Duty Solenoid 12V 200A - 24213BX

$498
Fitment Notes:
See More
OEX 600A Red / Black Heavy Duty Bus Bar Box - ACX3162
OEX

OEX 600A Red / Black Heavy Duty Bus Bar Box - ACX3162

$326
Fitment Notes:
See More
Drivetech 4x4 Power Distribution Box - DT-06013

Drivetech 4x4 Power Distribution Box - DT-06013

$224
Fitment Notes:
See More
OEX Voltage Sensitive Relay 12V 140A - ACX2052
OEX

OEX Voltage Sensitive Relay 12V 140A - ACX2052

$249
Fitment Notes:
See More
Projecta Battery Box 260mm x 275mm x 360mm 1Pce - BB285

Projecta Battery Box 260mm x 275mm x 360mm 1Pce - BB285

$87
Fitment Notes:
See More
Eveready Led Dolphin Torch MK7 - E300689700

Eveready Led Dolphin Torch MK7 - E300689700

$66
Fitment Notes:
See More
Narva Pipe Clamp 50mm Rubber & Steel - 10 Pc - 56490

Narva Pipe Clamp 50mm Rubber & Steel - 10 Pc - 56490

$59
Fitment Notes:
See More
Narva 12V Relay 4 Pin 70A - 68012BL

Narva 12V Relay 4 Pin 70A - 68012BL

$43
Fitment Notes:
See More
Energizer AA Battery Max 20Pk - E301024101

Energizer AA Battery Max 20Pk - E301024101

$35
Fitment Notes:
See More
Narva 12V Relay 40A 5 Pin With Resistor - 68028

Narva 12V Relay 40A 5 Pin With Resistor - 68028

$27
Fitment Notes:
See More
Showing 1171 - 1209 of 5737 products

2010 Ford Falcon Headlight Bulbs Replacement and Maintenance

The 2010 Ford Falcon is equipped with specific types of headlight bulbs best matched for providing clear visibility while driving at night or during poor weather conditions. Recognising signs of wear and ageing in the headlights is crucial, as proactive replacement or servicing significantly enhances driving safety. This guide focuses on the replacement and maintenance of headlight bulbs for your Falcon, ensuring you can confidently tackle any issues that arise.

First, it's essential to understand what type of headlight bulbs are used in the 2010 Ford Falcon. The vehicle typically comes with halogen bulbs, known for their durability and efficiency. Halogen bulbs are a popular choice for many vehicles, offering a blend of brightness and affordability. However, like all automotive bulbs, over time they will dim, flicker, or burn out, necessitating replacement. Let's explore the signs and steps involved in replacing these bulbs to keep your driving experience safe and enjoyable.

  • Signs of Headlight Bulb Wear:
    1. Dim or Flickering Lights: When headlights are not as bright as they use to be, it signals the bulbs may need replacement. Flickering might occur due to poor bulb connection or filament wear.
    2. Burning Smell: A faint burning smell near the headlamp housing indicates a bulb is on its last leg.
    3. Discolouration: Noticeable changes in the light's colour, such as a shift from white to yellow, suggest that the bulb's glass may have started to age or burn.

When any of these signs are observed, follow the guidance below to replace your Falcon's headlight bulbs.

  • Replacing the Headlight Bulbs:
    1. Choose the Right Bulb Type: It's vital to purchase the correct bulb type specified for your 2010 Ford Falcon. Check your owner's manual or the old bulb for part numbers.
    2. Tools and Preparation: Before starting, make sure you have the new bulbs, as well as necessary tools like a screwdriver and gloves to prevent oils from your skin from touching the glass of the new bulbs.
    3. Access the Headlight Assembly: Open the bonnet and locate the back of the headlight assembly. On the Falcon, you often don't need to remove the entire headlight assembly, as the bulb can typically be changed through the engine bay.
    4. Removing Old Bulbs: Disconnect the power wire from the bulb. Unscrew or unclip the bulb holder, then gently pull out the old bulb. Take note of how the old bulb is positioned as the new bulb will need to be installed in the same way.
    5. Install New Bulbs: Without touching the glass, place the new bulb into the socket, mirroring the position and angle of the old bulb. Secure the bulb with clips or screws, then reattach the power wire.
    6. Test and Adjust: Once installed, power on your headlights to ensure the new bulb is working. If needed, adjust the headlight position to ensure it is properly aimed and provides optimal visibility.

Completing these steps will ensure your headlights are restored to their full luminosity. However, regular maintenance can prolong the life of your headlight bulbs.

  • Maintaining Your Headlight Bulbs:
    1. Clean Regularly: Dirt and debris can accumulate on headlamp housings, reducing luminous output. Use a headlight cleaning kit or a mixture of baking soda and water for a DIY approach.
    2. Inspect for Moisture: Ensure the housing remains sealed to avoid moisture, which can reduce bulb efficacy and potentially cause bulb failure.
    3. Prevent Vibration: Loose fittings can cause bulbs to burn out quicker. Ensure all headlamp components are properly secured.
    4. Check Electrical Connections: Wires and connectors should be checked periodically for corrosion or signs of wear, ensuring they are transmitting power effectively to the bulbs.

Maintaining the headlight bulbs of your 2010 Ford Falcon is essential for safe driving. Being proactive about inspecting, cleaning, and, if necessary, replacing the bulbs will keep your vehicle ready for any condition. The process is straightforward and contributes to the car's performance and aesthetics. Happy driving!