Your Selected Vehicle
Parts for your 2009 Toyota Hiace-Tail lights
LED Autolamps 12/24V LED Stop/Tail/Indicator Lamp With Reflex Reflector Blister Pack 1 pce - 150ARM
Fitment Notes:
LED Autolamps 12/24 Multi Volt Stop/Tail/Indicator/Reverse Assembly Lamp With 108 LEDs - 80BARWM
Fitment Notes:
LED Autolamps 12/24V 280 Mini Jumbo Stop/Tail/Indicator Lamp Blister Pack - 280ARRM
Fitment Notes:
Hella 12/24V LED Stop/Tail/Indicator/Number Plate Lamp with 6M Lead - 23956MBULK
Fitment Notes:
LED Autolamps 12/24V 16 LED Stop/Tail Indicator Lamp Black Bracket Blister Pack - 201BSTIM
Fitment Notes:
Narva Model 72 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
Explore 4WD & Adventure
Narva 9 - 33 Volt LED Rear Stop/Tail And Direction Indicator Lamp Kit (Red/Amber) - 94526
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator Lamp With Reflex Reflector 2 Pack - 151BAR2
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Assembly With 4 Lamps - 80BARRWM
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Lamp 97 LEDs With Black Bracket - 200BARWM
Fitment Notes:
Hella DuraLED Combi-S Heavy Duty 12/24V LED Stop/Tail/Indicator Lamp with6M Lead - 23786MBULK
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp Black Bracket With 40cm Wire - 80BSTIM
Fitment Notes:
LED Autolamps 174 Series Stop/Tail/Indicator Lamp 12/24V, Surface Mount, 40cm Cable - 174ARMB
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly 3 Lamps With 153 LEDs - 125BARWM
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator/Reverse Assemnly Lamp With 108 LEDs - 80BARW
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator Assembly 3 Lamps With 108 LEDs Black Bracket - 80BARR
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp 190x95x28mm Blister Pack - 280ARM
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
Narva 9-33 Volt L.E.D Reverse Lamp White with Red L.E.D Tail Ring and Black Base - 94312
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Right Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312R
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail and direcion indicator and reverse lamp with in built retro reflector and 0.5m hard wired cable - 97310
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable, Bulk Pack Of 4 - 97010-1/4
Fitment Notes:
Narva Model 70 Rear Stop/Tail /Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97000-1-D
Fitment Notes:
Stedi C-4 Black Edition LED Light Cube Flood Pattern 4 LED Work Light - LEDWORK-C4-FLOOD
Fitment Notes:
Tail Lights on the 2009 Toyota HiAce: Purpose and Maintenance Tips
When it comes to the 2009 Toyota HiAce, tail lights are definitely relevant and very much in use. Tail lights play an essential role in vehicle safety and road communication, and this applies directly to the HiAce, a popular commercial van that's well-known for its reliability and practicality.
Tail lights are located at the rear of the vehicle and they are designed to illuminate whenever the headlights or parking lights are switched on. For the 2009 Toyota HiAce, these lights are crucial for ensuring that the vehicle is visible to traffic approaching from behind, especially in low light conditions such as dusk, dawn, or during adverse weather.
Aside from just lighting up, tail lights also incorporate brake lights and turn indicators. When the driver applies the brakes, the brake lights within the tail light assembly brighten to signal drivers behind to slow down or stop. The indicators flash to communicate intended turns or lane changes. That's a huge part of safe driving and preventing accidents.
Proper functioning of the tail lights on the Toyota HiAce is vital, keeping these lights in top shape contributes to not only the safety of the driver and passengers but also other road users. Because the HiAce frequently serves as a workhorse for tradespeople, delivery drivers, and families alike, it takes a good deal of use every day. Routine checks and maintenance of the tail lights are therefore highly recommended to avoid unexpected faults and fines.
Maintaining the tail lights on a 2009 Toyota HiAce doesn't need to be a hassle. Here are some simple steps and tips for replacement and upkeep:
- Regular Inspection: Every few weeks, have a look at the tail lights to check for any cracks, moisture buildup, or discolouration in the lens. Damage like this can reduce light output and allow water to enter, which may cause electrical failures.
- Clean the Lenses: Dirt and grime can quickly accumulate on the tail light lenses, especially if the vehicle is used on construction sites or unsealed roads. Clean lenses with a mild detergent and soft cloth to ensure maximum brightness.
- Check Bulbs: If a tail light doesn't illuminate, it's often due to a blown bulb. Accessing the tail light assembly on the 2009 HiAce is straightforward. Removing a few screws allows the lens to come off, giving access to bulbs that can be tested and replaced easily.
- Use Correct Bulbs: It's always best to replace tail light bulbs with the exact specification recommended by Toyota for the 2009 HiAce, usually a standard 21-watt bulb for tail lights. Using incorrect bulbs may cause fuse issues or inadequate lighting.
- Electrical Checks: If tail lights don't work even after bulb replacement, it can be a wiring issue or a faulty fuse. A quick check of the relevant fuses in the interior fuse box usually points to the problem. In tougher situations, consulting a qualified mechanic or auto electrician is advisable.
- Replace Entire Assembly if Needed: Over time, the tail light lens can become brittle or the reflector may degrade, causing poor light output. If cleaning and bulb replacement don't restore proper function, replacing the complete tail light assembly may be the best course of action. Genuine Toyota parts or quality aftermarket alternatives are readily available for the 2009 HiAce.
Service schedules for the 2009 Toyota HiAce emphasise the importance of checks on lighting systems as part of regular maintenance. Ensuring tail lights are always in good working order prevents breakdowns and keeps the vehicle meeting Australian road safety regulations. It's also a simple task that helps avoid those annoying fines from local traffic authorities for faulty lights.
In practical terms, a bright and functional set of tail lights reduces the chances of rear-end accidents. Other drivers can clearly see the size and position of the vehicle in the dark or poor weather, recognise when the HiAce is slowing down or about to turn, and react accordingly. This peace of mind benefits everyone on the road.
The 2009 Toyota HiAce tail lights are built to be durable and reliable, but like any part that's constantly exposed to the elements and harsh conditions, they need a bit of attention over time. Taking a moment to inspect and maintain tail lights ensures the HiAce keeps performing safely and effectively, whether it's hauling trades gear during the week or ferrying the family on the weekend.