Your Selected Vehicle
Parts for your 2009 Honda Odyssey-Headlights
LED Autolamps Front Marker LED White With Reflector 12-24V Perm Mnt - EU38WMHD
OEX Black Nylon Cable Ties - 4.8mm x 200mm, with Mounting Hole - 100 Pc - ACX1318
Explore 4WD & Adventure
LED Autolamps 12/24V Rear Indicator Light With Amber Lens Blister Pack - 113AMG
LED Autolamps Twin function rear position with supplementary rear indicator - 97CRIMB
LED Autolamps Twin function side indicator with amber/red side marker - 97ARIM
LED Autolamps 12/24V Reverse Light 200x50mm With 25 LEDs Black Bracket - 200BWM
LED Autolamps 12V Round Indicator Lamp With Amber Lens Recessed Mount 130mm Diameter - 102A
LED Autolamps Twin function side indicator with amber/red side marker - 97CARIM
LED Autolamps Twin function side indicator with amber/red side marker - 97CARIMB
LED Autolamps 12/24V Stop/Tail Lamp 49 LEDs With Bracket And 30cm Wire - 100RM
LED Autolamps 10/30V Chrome Series LED Red Amber Side Marker With 40cm Wire - 35CCARM
2009 Honda Odyssey Headlights
Headlights are absolutely fitted and relevant on the 2009 Honda Odyssey. Technical references such as the 2009 Honda Odyssey Owner’s Manual and Honda Service Manual specify halogen headlamps, typically using H11 bulbs for low beam and 9005 (HB3) for high beam, with some markets using the high beam as a daytime running lamp. These systems comply with lighting regulations such as ADR 13/00 (AU/NZ) and FMVSS 108 (US/Canada), confirming the Odyssey relies on conventional headlight assemblies for road use.
The headlights on a 2009 Odyssey do the heavy lifting after dark and in foul weather—helping the driver see clearly while making the vehicle more visible to others. Beyond safety and comfort, they’re a legal must. Keeping them bright, clean, and correctly aimed makes a noticeable difference on country roads and city commutes alike.
For day-to-day care, it’s smart to inspect the lenses and operation every 10,000 km or six months. Clean the lenses with a gentle car wash solution, not harsh solvents. If the plastic looks yellowed or hazy, a quality restoration kit can bring back clarity. Replace failing bulbs in pairs to keep brightness and colour even, and avoid touching the glass with bare fingers—use gloves or a clean tissue.
- Replacement basics: open the bonnet, locate the rear dust cap of the headlamp, disconnect the connector, twist out the old bulb, fit the correct H11 (low) or 9005/HB3 (high), and reinstall the cap. Test both beams before closing up.
- Aim check: park on level ground facing a wall, set the load as normal, and adjust using the vertical adjuster so the cut-off sits just below head height at a few metres. If unsure, let a workshop set the aim to ADR specs.
- Electrical checks: if both sides are out, look at the relevant fuse or relay first, moisture inside the housing points to a faulty seal that should be fixed promptly.
Thinking of upgrades? Quality halogen +130% bulbs are an easy, legal lift. LED or HID retrofits in halogen housings often aren’t road-legal in AU/NZ unless the entire lamp assembly is certified—best to stick with ADR-compliant options or consult an authorised technician.
Popular questions about 2009 Honda Odyssey headlights
What headlight bulb size does a 2009 Honda Odyssey use?
Most 2009 Odysseys use H11 for low beam and 9005 (HB3) for high beam. Some market variants differ, so it’s wise to confirm against the Owner’s Manual or the markings on the lamp housing. Parking/position and indicator bulbs are separate types.
How do you adjust the headlight aim on a 2009 Odyssey?
Park on level ground about 3–7 metres from a wall, with normal fuel and load. Mark the headlamp centre height on the wall, then use the vertical adjuster on each lamp to set the cut-off slightly below that line. Proper aim prevents glare and improves down-road visibility, a workshop can set it precisely to ADR guidelines.
Are LED or HID headlight upgrades legal for this model?
In Australia and New Zealand, swapping halogen bulbs for LED/HID inserts in standard reflector housings is often not road-legal unless the entire assembly is certified to the relevant ADR/ECE standard. If brighter light is the goal, choose premium halogen bulbs or seek an ADR-compliant headlamp assembly and have it fitted professionally.