Parts for your 2009 Holden Captiva 7-Pedal pads

Pedal pads for the 2009 Holden Captiva 7

Pedal pads are absolutely used on the 2009 Holden Captiva 7. Technical listings in the Holden/GM Global EPC for the CG-series Captiva (C100) specify a replaceable rubber brake pedal pad, with a clutch pedal pad on manual variants. The CG Captiva workshop manual also includes routine inspection of pedal pad wear. Major aftermarket catalogues for Australia and New Zealand (including genuine ACDelco service parts ranges) list brake pedal pads for 2006–2011 Captiva models, confirming fitment. The accelerator pedal is an integrated module and doesn’t use a separate rubber pad.

On a 2009 Captiva 7, the pedal pad’s job is simple but important: it provides a grippy, high-friction surface so boots don’t slip off the pedal, especially when it’s wet, muddy or sandy. For automatic models there’s a single serviceable pad on the brake pedal, for manuals, there’s a pad on both brake and clutch. Over time, the pad hardens, smooths out, or cracks, which can reduce traction right when it’s needed most.

As part of regular servicing, it’s smart to check the pad every 10,000–15,000 km, or any time the floor area’s been getting a workout from beach trips or farm tracks. Look for shiny smooth spots, edge tears, or the pad sitting loose on the metal pedal plate. If any of that’s present, it’s time to swap it.

Replacement is straightforward and usually tool-free:

• Peel the old pad off the pedal plate, starting at one corner.
• Clean the metal surface with a rag so the new pad seats properly.
• Warm the new pad slightly (a quick sun bake helps), then hook the bottom lip first and work it over the edges until fully seated.

Always choose a quality pad designed for the CG Captiva. Universal covers can sit poorly and may shift underfoot. After fitting, do a safe, stationary pedal press test to confirm it’s secure. If the Captiva is a manual, replace clutch and brake pads together so feel and grip are consistent.

Keeping fresh pedal pads is cheap insurance. It maintains pedal feel, reduces boot slip, and helps keep stopping distances predictable when roads get wet or the cabin’s full of beach sand. Simple job, big safety win.

Which pedals on a 2009 Captiva 7 have replaceable pads?

The brake pedal has a replaceable rubber pad on all models. Manual versions also have a replaceable clutch pedal pad. The accelerator is an integrated module without a separate pad.

How do you know when the brake pedal pad needs changing?

If the surface is smooth and shiny, cracked, hardened, or the pad moves on the pedal plate, replace it. Slippery feel in wet boots is another giveaway. Most owners check it during regular servicing or any time the mats are cleaned.

Are Captiva 5 and Captiva 7 pedal pads the same?

They can differ by series and transmission, so match parts to the VIN or CG-series specifics. Many CG-era pads cross over, but it’s best to confirm fitment for the exact variant.