Your Selected Vehicle
Parts for your 2009 Holden Captiva 7-Headlights
LED Autolamps 12V Black Chrome Round Indicator Lamp With Clear Lens - 102ABC
LED Autolamps 12/24V 280 Mini Jumbo Stop/Tail/Indicator Lamp Blister Pack - 280ARRM
LED Autolamps 385 Series Rear Combination Lamp LHS with 7 core plug - 385ARWMLCSB
LED Autolamps 12V Stop/Tail/Ind/Rev LED Light Kit 450mm Loom DT04 Connector - SO282ARWM2LR450
Explore 4WD & Adventure
LED Autolamps 355 Series Multi Volt Black Stop/Tail/Indicator/Reverse/Reflector LHS & RHS Twin Blister Pack - 355BARWM-2
LED Autolamps Multi Volt Round Indicator Lamp With Amber Lens Recessed Mount - 102AM
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Lamp With Inbuild Reflectors - 283ARWM
LED Autolamps Front Indicator & Position Light LED 24V Surface Mount - 135CAT124
LED Autolamps 12V Sequential Indicator Strip Light 10 Square LEDS Amber Lens Bulk Packaging - 235ASEQB
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp With Reflex Reflectors Grey Base Blister Pack 1 pce - 100ARM
LED Autolamps Twin function rear position with supplementary rear indicator - 97CRIMCSB
LED Autolamps 174 Series Rear Indicator Lamp 12/24V, Surface Mount, 40cm Cable - 174AMB
LED Autolamps 12V Front Indicator/Marker Lamp 80mm Round Blister Pack - 80AW
LED Autolamps 12/24V Stop/Tail/Indicator/Reflector With Licence Plate Lamp - 99ARLM
LED Autolamps Twin Function Side Indicator with Red Amber Side Marker RHS Multivolt - 800ARIMR
LED Autolamps Multi Volt Amber LED Side Marker 3 SMD LEDs Blister Pack - 181AME
LED Autolamps 10/30V LED Side Direction Indicator Light With 3m Tinned Cable - 58AM3
LED Autolamps 12/24V LED Stop/Tail/Indicator Lamp With Reflex Reflector Blister Pack 1 pce - 150ARM
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp Black Bracket With 40cm Wire - 80BSTIM
LED Autolamps 12V LED Stop/Tail/Indicator Assembly Light With Black Bracket - 80BAR
LED Autolamps 12V LED Stop/Tail/Indicator Light With Reflex Reflector Twin Blister - 100BAR2
LED Autolamps 12V Stop/Tail/Indicator/Reverse With Reflectors And 500mm LP Cable - SO283ARWM2LR12
LED Autolamps Multi Volt Stop/Tail/Indicator Assembly 72 LEDs With Black Bracket - 200BARM
LED Autolamps 9/30V LED Red Amber Side Marker Light Clear Lens 30cm Wire - 35ARMB
LED Autolamps 12/24V 16 LED Stop/Tail Indicator Lamp Black Bracket Blister Pack - 201BSTIM
2009 Holden Captiva 7 Headlights
Headlights are absolutely fitted to the 2009 Holden Captiva 7 and are essential for on-road compliance and safe driving. This is supported by the Holden Captiva CG Series Owner’s Handbook (MY09) and GM Service Information for the CG platform, which detail halogen headlamp assemblies and bulb replacement. Legal requirements are also clear: Australian Design Rule 13/00 and New Zealand’s Land Transport Rule: Vehicle Lighting 2004 mandate forward lighting performance and correct installation on passenger vehicles.
On this Captiva 7, the headlights do the heavy lifting at dusk, overnight and in foul weather, giving a clean spread of light and making the vehicle visible to everyone else. They typically use halogen bulbs—commonly H7 for low beam and H1 for high beam—delivering dependable output with straightforward servicing. Keeping them in top nick isn’t just about visibility, it’s about staying within ADR/WOF standards and avoiding fix-it notices.
When it comes time for a change, this model’s bulbs are accessed from the rear of the headlamp unit under the bonnet. The dust cap comes off, the spring clip releases, and the bulb slides out—easy as, though the battery side can be a bit tight for space. It’s smart to replace bulbs in pairs so brightness and colour match, and never touch the glass with bare fingers. After fitting, a quick check of beam aim using the adjusters on the housing helps prevent glare for oncoming traffic.
Regular checks during servicing keep things sweet. Look for dull output, a blown filament, or any moisture under the lens. Cloudy lenses from UV haze can knock performance back, a proper headlight restoration kit will usually bring clarity back. If a light is out, confirm the relevant fuse in the under‑bonnet fuse box, and inspect the connector for heat damage. For longevity, quality branded halogens are worth the extra few dollars.
- Inspect lens clarity and seals every 10,000–15,000 km.
- Swap bulbs in pairs, keep a spare H7 in the glovebox.
- Clean lenses with plastic-safe products only.
- After any front-end work, re-check headlight aim.
Popular questions about 2009 Holden Captiva 7 headlights
What bulb types does the 2009 Captiva 7 use?
Most Captiva 7 variants from 2009 run halogen H7 low beam and H1 high beam, with wedge parkers and H11 fogs on equipped models. Always confirm against the Owner’s Handbook or the label on the headlamp cover, as trims can vary.
Why are my headlights dim or yellow?
Ageing halogen bulbs slowly dim, and lenses can haze from UV exposure. Replacing both bulbs and restoring the lens surface usually brings back a strong, white beam. Also check voltage, earths, and the headlight relay if performance is inconsistent.
Do I need to re-aim the lights after replacing a bulb?
Usually the aim won’t change with a simple bulb swap, but it’s good practice to check on a flat surface. If the beam pattern looks off or you’ve had front-end repairs, use the adjusters to set the cutoff correctly to ADR/WOF guidelines.