Skip to content Skip to navigation menu

Your Selected Vehicle

Brands

Show More Show Less

Price

Parts for your 2008 Holden Commodore-Headlight bulbs

Sort by
Mechpro Jumper Leads 400A 2.5m - MPBCBL400S3

Mechpro Jumper Leads 400A 2.5m - MPBCBL400S3

$39
Fitment Notes:
See More
Projecta Battery Terminal - BT31-1

Projecta Battery Terminal - BT31-1

$12
Fitment Notes:
See More
OEX Midi Fuse, 80A Bolt On - Single Pack - ACX6508BL
OEX

OEX Midi Fuse, 80A Bolt On - Single Pack - ACX6508BL

$10
Fitment Notes:
See More

Explore 4WD & Adventure

Narva Black Switch Decal Set - 4WD - 63176BL
Clearance

Narva Black Switch Decal Set - 4WD - 63176BL

$2
Fitment Notes:
See More
CTEK 3000A Premium Jump Starter - 40-625

CTEK 3000A Premium Jump Starter - 40-625

$629
Fitment Notes:
See More
VDO Digital Hour Meter - Resettable - 331.535
VDO

VDO Digital Hour Meter - Resettable - 331.535

$295
Fitment Notes:
See More
Repco 12V LED Bullbar Marker/Indicator Pair - RLM1752

Repco 12V LED Bullbar Marker/Indicator Pair - RLM1752

$217
Fitment Notes:
See More
Stedi EVO Lightbar 45-53mm Clam Bracket - ST-11-EVO-045

Stedi EVO Lightbar 45-53mm Clam Bracket - ST-11-EVO-045

$199
Fitment Notes:
See More
CTEK 5A Compact Battery Charger NXT 5 - 40-663

CTEK 5A Compact Battery Charger NXT 5 - 40-663

$219
Fitment Notes:
See More
VDO Fuel Gauge 12V 10- 180 Ohms 52mm - 301010011
VDO

VDO Fuel Gauge 12V 10- 180 Ohms 52mm - 301010011

$147
Fitment Notes:
See More
HELLA Licence Plate Light LED 9 to 33V - 2559

HELLA Licence Plate Light LED 9 to 33V - 2559

$72
Fitment Notes:
See More
Narva Rear Marker Light Red LED 9 to 33V - 91632BL

Narva Rear Marker Light Red LED 9 to 33V - 91632BL

$48
Fitment Notes:
See More
BRAKE LIGHT SWITCH - TBS1011

BRAKE LIGHT SWITCH - TBS1011

$44
Fitment Notes:
See More
HELLA Side Marker Light Red/Amber LED 9 to 33V - 2053

HELLA Side Marker Light Red/Amber LED 9 to 33V - 2053

$39
Fitment Notes:
See More
Drivetech 4x4 12/24V 20A Power Socket - DT-06101

Drivetech 4x4 12/24V 20A Power Socket - DT-06101

$35
Fitment Notes:
See More
Hella Mini Relay 12V Change Over 30A - 4RD933332043

Hella Mini Relay 12V Change Over 30A - 4RD933332043

$27
Fitment Notes:
See More
Narva Ceramic Fuse Assortment 10 Pce - 52600BL

Narva Ceramic Fuse Assortment 10 Pce - 52600BL

$8
Fitment Notes:
See More
Repco LED Lamp 10 - 30v Red 58x35x25mm - RLMRBLS2
Clearance

Repco LED Lamp 10 - 30v Red 58x35x25mm - RLMRBLS2

$2
Fitment Notes:
See More
Redarc 1000W Pure Sine Wave Inverter 12V - R-12-1000RS

Redarc 1000W Pure Sine Wave Inverter 12V - R-12-1000RS

$1,311
Fitment Notes:
See More
Autel Back-to-Back Pedestal - PED-DUAL
Clearance

Autel Back-to-Back Pedestal - PED-DUAL

$541
Fitment Notes:
See More
Projecta 12V Portable Power Hub Battery Box - PH125

Projecta 12V Portable Power Hub Battery Box - PH125

$806
Fitment Notes:
See More
Showing 898 - 936 of 5741 products

Understanding and Maintaining Headlight Bulbs on the 2008 Holden Commodore

The 2008 Holden Commodore is a classic Australian vehicle known for its robust build and reliable performance. When it comes to lighting, the 2008 Commodore certainly isn't lacking, as it does indeed use traditional headlight bulbs. These bulbs play a crucial role in driving safety and vehicle functionality, illuminating the road ahead for night driving and poor weather conditions.

Headlight bulbs on the 2008 Holden Commodore are essential components fitted within the headlamp units at the front of the vehicle. Their primary purpose is to ensure the driver has clear visibility on the road, providing both low beam and high beam settings depending on the driving conditions. Low beam bulbs offer adequate road illumination without dazzling oncoming traffic, while high beam bulbs cast a brighter, longer-reaching light pattern for unlit roads and open highways.

The headlights on the 2008 Commodore typically use halogen bulbs, a popular choice for many vehicles of its era. Halogen bulbs offer good brightness and a reasonable lifespan without the higher cost of more modern alternatives like HID or LED bulbs. The two main halogen bulb sizes found in the Commodore's headlight assembly tend to be H7 for low beams and H1 or H4 for high beams, depending on the exact model variant.

Because headlights are so crucial for driving safety, maintaining and replacing these bulbs is an important part of the regular service routine. Driving with faulty or dim headlight bulbs can pose a real danger not only to the driver but also to other road users. It's recommended to check the bulbs regularly and replace them as soon as any signs of dimming, flickering, or failure appear.

Here are some practical tips and advice for replacing and maintaining headlight bulbs on a 2008 Holden Commodore:

  1. Checking Bulb Condition
    • Regularly inspect the headlight during both day and night. Look out for reduced light output or uneven lighting which indicates a bulb nearing its end.
    • If one bulb fails, it's often smart to replace both bulbs at the same time. This avoids uneven lighting caused by bulbs aged differently.
  2. Choosing the Right Replacement Bulbs
    • Use halogen bulbs that meet the manufacturer's specifications (usually H7 for low beam and H1/H4 for high beam). Check the vehicle manual or consult a parts specialist to confirm.
    • Consider bulbs with improved lifespan or brightness if driving in rural or poorly lit environments.
  3. Replacing the Bulbs
    • Always switch off the engine and lights before attempting replacement to avoid electrical shock or burns.
    • Accessing the bulbs typically involves opening the bonnet and removing dust covers at the rear of the headlight assembly.
    • Handle new bulbs with care, avoiding touching the glass with bare fingers, as oils can cause premature failure.
    • Ensure the new bulb clicks or fits securely into place before reassembling the headlamp assembly.
  4. Additional Maintenance Tips
    • Check headlight lens clarity as fogginess or yellowing can reduce lighting effectiveness. Restoring or replacing lenses improves light output.
    • Inspect headlight adjusters during servicing to ensure beams are correctly aligned preventing accidental glare to other drivers.
    • Periodically clean the exterior of the headlights to keep them free from dirt and grime.

If the 2008 Holden Commodore's headlight bulbs fail while on the road, it's a good idea to replace them as soon as possible. Driving without proper headlights is not only dangerous but also illegal under most Australian road rules. Having a spare set of bulbs in the boot can save a trip to a mechanic and keep the car roadworthy.

Finally, headlight bulbs are a relatively affordable but critically important part of the 2008 Holden Commodore. Giving them a bit of attention during servicing or routine vehicle checks will ensure continued safe and confident night driving, and keep the vehicle looking and performing as it should. Whether you're cruising city streets or tackling country roads, properly maintained headlights make a real difference to your driving experience.