Parts for your 2008 Holden Barina-Wheel hubs

2008 Holden Barina wheel hubs

Technical references show the 2008 Holden Barina (TK) absolutely uses wheel hubs front and rear. The Holden Barina TK Service Manual and GM Global Service Information for the T250 platform (also sold as the Chevrolet Aveo) specify a front hub-and-bearing unit pressed into the steering knuckle, and a rear hub/bearing assembly on drum-brake models. Major aftermarket catalogues from ACDelco, SKF and Repco also list complete hub or hub-and-bearing kits for this model. So wheel hubs are definitely relevant to the 2008 Barina.

On the Barina, a wheel hub’s job is straightforward but critical. It’s the mounting point for the wheel and studs, houses the wheel bearing, and on ABS-equipped cars often carries a magnetic encoder ring for the speed sensor. The hub keeps the wheel rotating true, supports the vehicle’s weight through the bearing, and helps maintain safe braking and handling. Because the bearings are sealed, they’re designed to run for heaps of kilometres with no greasing, provided the seals stay intact and the hub isn’t hammered by kerbs or potholes.

There’s no set maintenance interval for Barina hubs