Your Selected Vehicle
Parts for your 2007 Toyota Vitz|yaris-Interior bulbs
Explore 4WD & Adventure
Narva Marine 12V Saturn Dual Colour 75mm LED Interior Lamp with Touch Switch (White/Red) - 87501WRBL
Narva Marine 12V Saturn Dual Colour 130mm LED Interior Lamp with Touch Switch (White/Red) - 87503WRBL
2007 Toyota Vitz/Yaris interior-bulbs — what they do and how to look after them
Interior-bulbs are absolutely relevant and fitted to the 2007 Toyota Vitz/Yaris (XP90). Toyota’s Owner’s Manual for the 2007 Yaris/Vitz and Toyota’s Electronic Parts Catalogue list serviceable bulbs for the room (dome) lamp, map/reading lamps and the luggage/boot lamp. Most trims of this model use a festoon-style bulb for the room lamp and T10 (W5W) wedge bulbs for map and boot lamps, all 12 V service items. Those factory references confirm that these are replaceable bulbs, not sealed LED units.
Inside the cabin, these little globes pull more than their weight. They light up the cabin when jumping in at night, help find gear on the back seat, and make loading the boot less of a guessing game. They also tie in with door switches and the key unlock function, so good bulbs improve everyday convenience and help with safety when buckling up or checking child seats in the dark.
As part of regular servicing on a 2007 Vitz/Yaris, it’s worth checking the interior-bulbs annually or every 15,000 kilometres. If light output looks dim, there’s flickering, or the lamp doesn’t come on with the door, it may be time for a bulb. Stick with the correct wattage and base type as per the owner’s manual sticker or service data. Commonly, that means a 31–32 mm festoon for the centre room lamp and T10 (W5W) wedges up front and in the boot. Over-wattage bulbs can overheat and discolour the lens.
- Switch the lamp off and let it cool.
- Gently pry the lens off with a trim tool or plastic card.
- For festoon: spring the clips apart and roll the bulb out. For T10: pull the wedge bulb straight out.
- Avoid touching glass with bare fingers, use gloves or a clean tissue.
- Seat the new bulb firmly, test it, then refit the lens.
Plenty of owners like LED upgrades for a crisper, whiter light and lower draw. That’s fine if the LED matches the original base and fits under the lens. Choose CANbus-friendly types if you get ghost glow, and avoid super-high-output LEDs that can glare or create hot spots. If a new bulb doesn’t work, check the door switch, the lamp’s on/off/door slider, and the relevant fuse before assuming a wiring fault.
Popular questions about 2007 Toyota Vitz/Yaris interior-bulbs
What interior-bulbs sizes does a 2007 Vitz/Yaris use?
Most 2007 Vitz/Yaris models use a festoon bulb for the centre room lamp and T10 (W5W) wedges for the map and boot lamps. Always confirm against the owner’s manual or the marking on the lamp holder, as some trims vary.
Can they be upgraded to LED?
Yes. Quality LED replacements with the correct base will fit and give brighter, whiter light. Pick sensible lumen levels to avoid glare, and ensure the LED fits under the lens. If there’s faint glow with doors shut, swap to a CANbus-type LED.
Why does my interior light stay on?
Common culprits are the lamp switch left in the ON position, a misadjusted or faulty door-ajar switch, or a sticky hatch switch. Less commonly, a blown fuse elsewhere or wiring fault can backfeed. Start with the switch position, then check each door/hatch switch and the lamp fuse.
