Parts for your 2007 Nissan Serena-Steering bushes

2007 Nissan Serena steering bushes — what they do and when to replace them

Steering bushes are fitted to the 2007 Nissan Serena (C25). This is confirmed by the Nissan Serena C25 Series Service Manual (ST: Steering — Steering Gear & Linkage, Steering Column), which shows rack mounting insulators and column bushings, and by the Nissan Electronic Parts Catalogue (FAST) listing items such as “Insulator — Steering Gear” and “Bushing — Steering Column”. So, yes — steering bushes are relevant on this model.

On a 2007 Serena, the steering bushes sit where the steering rack bolts to the subframe, and within the column assembly. Their job is to cushion vibration, keep the rack securely located, and maintain tidy steering feel. By isolating road buzz and taking up minor movement, they help the van track straight, reduce clunks over bumps, and protect other steering bits from shock. They’re usually rubber (sometimes upgraded to urethane) and live a hard life: heat, load, road grime, and, on hydraulic-assist versions, the odd splash of power steering fluid.

When they start to go soft, split, or oval out, owners may notice light knocking over corrugations, vague on‑centre feel, or a shimmy that’s hard to pin on tyres or balance. Under the bonnet, the rack may show signs of slight fore‑aft movement when someone rocks the steering wheel.

As part of routine servicing in Australia and New Zealand conditions, it’s smart to check steering bushes every 10–15,000 km or during each WOF/service. Look for perished rubber, cracks, oil-soaked material, or shiny witness marks where the rack has been shifting. If one bush is tired, replace them as a set to keep the rack square.

• Symptoms that call for replacement:
  • Clunk or thud in the steering over bumps
  • Steering wander or increased play
  • Uneven or accelerated outer-edge tyre wear
• Service tips:
  • Use quality OEM-equivalent bushes, avoid petroleum sprays on rubber
  • Tighten brackets with the vehicle at normal ride height to prevent pre-load
  • If the subframe or rack position is disturbed, book a wheel alignment
  • Inspect inner and outer tie rods and sway bar bushes while you’re there

With fresh, correctly fitted bushes, the 2007 Serena’s steering feels calmer and more precise, making school runs and holiday hauls that bit more relaxing.

Popular questions about 2007 Nissan Serena steering bushes

Do the steering bushes on a 2007 Serena come as part of the rack?
They’re separate wear parts. The rack mounts to the subframe using insulator bushes and brackets, which can be renewed without replacing the entire steering rack. That keeps costs sensible and restores steering firmness.

How often should Serena steering bushes be replaced?
There’s no fixed interval — it depends on kilometres, road quality, and exposure to oil or heat. Many owners get long service life, but once there’s play, visible cracking, or a dull knock over bumps, it’s time. Regular inspections during routine servicing will catch them before they cause tyre wear.

Will replacing steering bushes require a wheel alignment?
If only the rack insulators are swapped and the rack’s position isn’t altered, alignment often stays within spec. However, any movement of the rack or subframe, or if tie rods are loosened, warrants a wheel alignment to keep the Serena tracking straight and protect the tyres.