Parts for your 2007 Mitsubishi Outlander-Oil pump

2007 Mitsubishi Outlander oil pump

Technical sources confirm the 2007 Mitsubishi Outlander does use an engine oil pump. Mitsubishi Motors’ 2007 Outlander Workshop Manual (Engine – Lubrication) specifies a crank‑driven trochoid oil pump across its engines, and the Mitsubishi ASA electronic parts catalogue lists the complete oil pump assemblies and related gaskets/seals for the 2.4L 4B12 four‑cylinder and 3.0L 6B31 V6 (with similar listings for market‑specific diesels). Independent repair guides covering the 2007 Outlander likewise detail oil pump priming and pressure checks. So, an oil pump is absolutely fitted and relevant to this model.

The Outlander’s oil pump is the quiet achiever under the bonnet, pushing the right amount of oil through the galleries so bearings, cams and MIVEC hardware stay happy—whether it’s school runs or big kilometres on the open road. On the 2.4L four it’s driven off the crank via the balance shaft/oil pump module, and on the 3.0L V6 it’s integrated at the front of the engine and crank‑driven. Either way, it’s a durable, trochoid‑type pump designed to build pressure quickly and keep it stable when the oil’s hot.

Servicing wise, the pump itself isn’t a routine replacement item. The best way to look after it is simple: stick to quality oil and filters at the proper intervals, use the manufacturer‑specified viscosity for local Aussie/Kiwi conditions, and keep sludge at bay. If the oil pressure warning light flickers, there’s persistent top‑end rattle on hot idle, or there’s metal in the sump, it’s time for proper diagnosis with a mechanical gauge before blaming the pump.

When replacement is justified (confirmed low pressure, relief valve issues, heavy wear, or when the front cover is already off for major timing work), it’s a fair bit of spanner time. Expect sump and front cover removal, careful cleaning and resealing, and fresh crank/front cover seals. On the 2.4L, inspect the balance shaft/oil pump chain and guides