Parts for your 2007 Mazda Premacy-Pedal pads

2007 Mazda Premacy pedal pads — what they do and when to replace them

Technical sources confirm pedal pads are used on the 2007 Mazda Premacy (Mazda5, CR series). The Mazda Electronic Parts Catalogue for the 2005–2010 Premacy lists a removable rubber brake pedal pad, plus a clutch pedal pad on manual models. The factory Workshop Manual’s “Brake Pedal” section also depicts the serviceable pad cover fitted to the pedal face. On most variants the accelerator uses an integrated plastic tread, not a separate rubber pad.

On this model, the pedal pad is a grippy rubber cover that fits over the metal brake (and clutch) pedal. It provides traction underfoot, especially in the wet, reduces vibration, and protects the pedal face from wear. A fresh pad helps keep pedal feel consistent and can aid roadworthy/WOF checks where secure, non-slip pedal surfaces are expected.

Brake pedal pads wear gradually. They go shiny or “glazed”, develop cracks, lose their edge pattern, or can loosen on the pedal. A smooth pad can let a shoe slip—particularly with damp soles—so it’s worth keeping an eye on. Manual Premacy owners should also check the clutch pad, autos will just have the brake pad to service.

• Signs it’s time: hardened or glossy surface, splits, worn-down tread, pad shifting on the pedal, or a failed roadworthy/WOF note.
• Replacement tips: it’s a quick driveway job—no special tools. Warm the new pad slightly (sunlight or warm water) so it’s more pliable, then hook it over the pedal lip and work it on evenly. Make sure the rear lip is fully seated all the way round.
• What to buy: an OEM or quality aftermarket pad matched to the VIN/production year. Brake and clutch pads differ, accelerator tread is typically integral and not replaced as a separate rubber pad.
• Maintenance: clean occasionally with mild soap and water, avoid silicone or tyre shine on pedals—they reduce grip. Check floor mats aren’t fouling pedal movement.

For most 2007 Premacy vehicles, a new brake pedal pad is a low-cost safety refresh. If it’s a manual, replacing the clutch pad at the same time keeps the feel consistent across both pedals. A quick inspection at each service is enough—if it looks shiny or cracked, swap it out.

Are pedal pads the same for auto and manual 2007 Premacy models?

The brake pedal pad is commonly shared across many trims, but the clutch pad is specific to manual models. The accelerator usually has an integrated plastic tread rather than a separate rubber pad. It’s best to confirm by VIN to ensure the right fit.

How often should pedal pads be replaced on a 2007 Mazda Premacy?

There’s no fixed interval—replace when worn. Many pads last years, but heat, mileage, and footwear can speed wear. If the surface is smooth, cracked or loose, or if a WOF/rego check flags it, fit a new pad straight away.

Is it safe to drive with a worn brake pedal pad?

It’s not ideal. A glazed or loose pad can let a foot slip, especially when wet, which isn’t something to gamble on. Pads are inexpensive and quick to fit, so replacing them promptly is the smart move.