Parts for your 2007 Lexus Is-Pedal pads

2007 Lexus IS pedal pads — purpose, care and replacement

Pedal pads are absolutely used on the 2007 Lexus IS. Technical references, including the Lexus IS (GSE20/21/25) Repair Manual – Brake Pedal section and the Toyota/Lexus Electronic Parts Catalogue for 2006–2013 IS models, show a removable rubber brake pedal pad and, on manual IS250 variants, a clutch pedal pad. The accelerator pedal on this model is an electronic module without a separate rubber pad.

On the 2007 IS, pedal pads do the quiet, important work: they give the driver solid grip in the wet, reduce foot fatigue on longer trips, and help prevent slips under heavy braking. They also help keep inspectors happy at WoF/Reg checks on both sides of the ditch, because torn or missing pads can be flagged as a safety defect. For manual IS250s, the clutch pad gives the same grippy, cushioned feel when feathering the pedal in traffic.

Like tyres, pedal pads wear. If the ribs are worn smooth, the rubber’s gone shiny or hard, or the edges are curling and cracking, grip drops off. Oil, silicone dressings and road grime can glaze the surface, too. Any sign the pad is loose on the metal pedal, or the rubber is split, means it’s time to swap it out. It’s a small, inexpensive part that makes a big difference when you need to stomp the middle pedal hard.

• Inspection: give the brake (and clutch, if fitted) pad a look every 10,000 km or 6 months.
• Cleaning: use mild soapy water and a soft brush, avoid silicone or “shiny” interior dressings that make pads slippery.
• Replacement: pick a quality OE or ADR/NZS-compliant pad. Autos need the brake pad only, manuals need brake and clutch pads.

Swapping a pad is a quick job at home. Lever the old rubber off, check the pedal face for rust or burrs, and wipe it clean. Warm the new pad slightly (a sunny windowsill works), then hook it over the top lip and work it down and around until the bead seats fully all the way around. Press firmly to confirm it’s locked on. Finish with a quick “dry shoe” test to make sure grip feels right before driving off.

Popular questions

How do you know when the 2007 Lexus IS brake pedal pad needs replacing?
If the ribs are flattened, the rubber is shiny or hardened, or there are splits and curled edges, it’s due. Any slip under a wet shoe is a red flag. Many inspectors will also call out missing or perished pads at WoF/Reg time.

Does the accelerator pedal on a 2007 Lexus IS have a replaceable pad?
No. The accelerator is a one-piece electronic pedal assembly without a separate rubber pad. Only the brake (and clutch on manuals) use removable rubber pads.

Are alloy pedal covers OK on a 2007 Lexus IS?
They’re fine if they’re secure, non-slip, and don’t interfere with pedal travel. For WoF/Reg, they mustn’t create a hazard. Many owners keep OE rubber pads on hand in case an inspector prefers the factory setup.