Your Selected Vehicle
Parts for your 2007 Honda Cr-v-Pedal pads
Explore 4WD & Adventure
2007 Honda CR‑V Pedal Pads — What They Do and When to Replace Them
Based on Honda’s technical literature — the 2007–2011 Honda CR‑V Service Manual (Brakes > Pedal) and the Honda electronic parts catalogue — this model is fitted with replaceable rubber pedal pads on the brake pedal, and on the clutch pedal for manual-transmission variants. The accelerator pedal uses an integral plastic tread, so there’s no separate removable pad on the throttle.
On a 2007 Honda CR‑V, pedal pads are simple but important safety parts. The rubber face gives the driver reliable grip in the wet, helps reduce foot fatigue on longer drives, and protects the metal pedal arm from wear. When the pad hardens, cracks or goes smooth and shiny, grip drops off — that’s when it’s time to swap it out.
As part of routine servicing, it’s smart to check the brake (and clutch, if fitted) pedal pad condition. A quick visual once-over takes seconds and can prevent a slippery moment. If the pad surface is glazed, missing chunks, or feels hard as plastic, replacement is due. Many roadworthy and WOF inspections will ping a car for excessively worn pedal rubbers, so keeping them tidy can also save a recheck.
- Signs it’s worn: smooth or shiny surface, visible cracks or splits, edges curling, or your foot slipping — especially with wet soles.
- Care tips: clean with mild soapy water and a soft brush, avoid silicone dressings or greasy cleaners that reduce grip.
- Replacement: the old pad simply pulls off, warming the new pad in hot water for a minute makes it more pliable. Press evenly over the pedal plate until the lip seats all the way around.
Quality matters. Go for an OEM or OEM‑equivalent pad that’s designed for the CR‑V’s pedal plate. Universal covers that screw or clamp on can foul the pedal, add thickness, or catch on floor mats — not ideal. For manuals, replace the clutch and brake pads as a pair if both are looking tired, it keeps pedal feel consistent underfoot.
How often? There’s no fixed kilometre interval. Urban stop‑start driving, muddy work boots, or lots of wet-weather use will wear pads faster. Ask your tech to inspect them at every service and replace at the first sign of glazing or cracking. It’s a quick, low‑cost job that pays back in grip and confidence.
Popular question: Does the 2007 Honda CR‑V have a replaceable accelerator pedal pad?
No. The accelerator is an integrated plastic pedal and doesn’t use a separate rubber pad. Only the brake pedal — and the clutch pedal on manuals — have replaceable rubber pads.
Popular question: How often should the brake pedal pad be replaced on a 2007 CR‑V?
There’s no set schedule. Replace it when the surface is smooth, cracked, hardened or slippery. For most drivers, that could be anywhere from every few years to a decade, have it checked at each service.
Popular question: Are aftermarket pedal pads OK for a 2007 CR‑V?
Yes, if they’re made for the CR‑V’s pedal plate and match OEM dimensions and grip. Avoid universal clamp‑on covers that can alter pedal thickness or snag on floor mats. When in doubt, stick with OEM‑spec pads.
