Your Selected Vehicle
Parts for your 2007 Honda Cr-v-Headlight bulbs
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp With Reflex Reflectors Grey Base Blister Pack 1 pce - 100ARM
LED Autolamps 174 Series Stop/Tail/Indicator Lamp 12/24V, Surface Mount, 40cm Cable - 174ARMB
Explore 4WD & Adventure
LED Autolamps 174 Series Reverse Lamp 12/24V, Surface Mount, 40cm Cable - 174WMB
LED Autolamps 174 Series Stop/Tail Lamp 12/24V, Surface Mount, 40cm Cable - 174RMB
LED Autolamps 12V Stop/Tail Lamp Black Chrome Round With Clear Lens - 102RBC
LED Autolamps 10/30V LED Side Direction Indicator Light With 30cm Wire - 35AMB
LED Autolamps 12/24V Round Stop/Tail Lamp With Clear Lens 130mm Diameter Recessed Mount Blister Pack - 102RCM
LED Autolamps Licence Plate Lamp Black Bracket Multi Volt With 1m Cable - 35BLM1P
LED Autolamps 12V Front Indicator Amber Lens Black Base Twin Blister Pack - 175A/2
LED Autolamps LHS, Stop/Tail/SEQ-Indicator/Reverse/Reflector 12/24V 284 X 100 X 37mm, DT04 Connector - SO284LHS
LED Autolamps 12/24V Reversing Lamp With 25 White LEDs With Bracket and 30cm Wire - 100WM
LED Autolamps 12V 82 Series Stop/Tail/Indicator/Reverse Lamp Black Bracket - 82BARW
LED Autolamps 12/24 Multi Volt Stop/Tail/Indicator/Reverse Assembly Lamp With 108 LEDs - 80BARWM
LED Autolamps 12/24V LED Reverse Lamp Screw Surface Mount Blister Pack - 12WM-2
LED Autolamps Multi Volt Stop/Tail/Indicator With 18 Square LEDs Twin Blister - 135ARM/2
2007 Honda CR‑V headlight bulbs
Headlight bulbs are definitely used on the 2007 Honda CR‑V. Technical sources including the 2007 Honda CR‑V Owner’s Manual and Honda parts catalogues specify replaceable halogen bulbs for the headlamps—typically H11 for low beam and HB3/9005 for high beam in most trims and markets. The bulb types are also confirmed by the markings on the lamp housings and the bulb bases.
On a 2007 CR‑V, the headlight bulbs do the heavy lifting after dark—throwing a clean, compliant beam so the driver can see the road and be seen by others. They’re a wear item, and like any halogen globe they gradually lose brightness and colour as the filament ages. That’s why it’s smart to treat bulbs as part of regular servicing, not just fix them when one finally pops.
For everyday motoring around Australia and New Zealand, sticking with the correct ADR/NZTA‑compliant halogen types keeps things legal and safe. Many 2007 CR‑V models run H11 low beams with HB3/9005 high beams, some trims and markets can vary, so it’s always worth checking the owner’s manual or the lens markings before buying.
- Tell‑tale signs it’s time: dim output, a yellowish beam, flicker, or one side looking noticeably duller than the other.
- Good practice: replace bulbs in pairs so beam colour and brightness match, and avoid touching the glass—oily fingerprints create hot spots that shorten life.
DIY replacement on the CR‑V is straightforward with basic tools. Park up safely, switch everything off, and pop the bonnet. Unplug the connector at the rear of the headlamp, twist the bulb anti‑clockwise to release, and withdraw it carefully. Fit the new bulb, aligning the tabs, twist to lock, and reconnect the plug. On the right‑hand side, moving the intake snorkel may help access, on the left, mind the battery. After fitting, check the pattern against a wall and adjust aim if needed so you’re lighting the road, not the night sky.
For longevity, choose quality branded globes rated for standard output or long life if you do a lot of night kilometres. If you opt for higher‑output halogens, expect a brighter beam but usually a shorter service life. Either way, the 2007 CR‑V’s headlight bulbs are a quick, affordable refresh that makes night driving clearer and safer.
Popular questions
What headlight bulb types fit a 2007 Honda CR‑V?
Most 2007 CR‑V models use H11 for low beam and HB3/9005 for high beam. Always verify against the owner’s manual, the parts label, or the markings on the headlamp housing, as some trims and regions can differ.
Can LED bulbs be used instead of halogen in a 2007 CR‑V?
LED retrofit bulbs may physically fit, but road legality in AU/NZ depends on compliance with ADR/NZTA rules and whether the lamp is approved for LEDs. Many halogen housings aren’t certified for LED light sources. If considering LEDs, check local regulations and ensure the beam pattern and glare control remain correct.
How often should headlight bulbs be replaced?
There’s no strict interval, but halogens dim over time. Many owners change them every 2–4 years or at the first sign of reduced output. Replacing in pairs keeps the beam even and avoids mismatched colour and brightness.