Your Selected Vehicle
Parts for your 2007 Honda Accord-Oxygen sensor
Penrite Vantage Semi Synthetic 10W-40 Engine Oil 6L - VANSEMI10W40006
Penrite Vantage Semi Synthetic 15W-40 Engine Oil 6L - VANSEMI15W40006
Penrite Enviro+ Hybrid 0W-16 Engine Oil 5L - EPLUSHYB0W16005
Explore 4WD & Adventure
Penrite Vantage Semi Synthetic 5W-30 Engine Oil 6L - VANSEMI5W30006
Penrite Enviro+ Full Synthetic 0W-20 Engine Oil 5L - EPLUS0W20005
Penrite Enviro+ Full Synthetic 0W-20 Engine Oil 1L - EPLUS0W20001
Penrite Enviro+ Full Synthetic 5W-20 Engine Oil 1L - EPLUS5W20001
Penrite Enviro+ Full Synthetic 5W-20 Engine Oil 10L Enviro Box - EPLUS5W20010BOX
Penrite Vantage Semi Synthetic 10W-40 Engine Oil 4L - VANSEMI10W40004
Penrite Vantage Premium Mineral 15W-40 Engine Oil 6L - VANMIN15W40006
Penrite Enviro+ Full Synthetic 5W-20 Engine Oil 5L - EPLUS5W20005
Penrite Vantage Semi Synthetic 5W-30 Engine Oil 1L - VANSEMI5W30001
Penrite Vantage Semi Synthetic 10W-40 Engine Oil 1L - VANSEMI10W40001
Penrite Vantage Semi Synthetic 10W-40 Engine Oil 20L - VANSEMI10W40020
Penrite Enviro+ Full Synthetic 0W-20 Engine Oil 20L - EPLUS0W20020
Penrite Vantage Semi Synthetic 15W-40 Engine Oil 1L - VANSEMI15W40001
Penrite Enviro+ Full Synthetic 5W-20 Engine Oil 20L - EPLUS5W20020
Penrite Enviro+ Full Synthetic 5W-20 Engine Oil 20L Enviro Box - EPLUS5W20020BOX
2007 Honda Accord oxygen sensor — what it does, and when to sort it
Yes, the 2007 Honda Accord is fitted with oxygen-sensing hardware. Technical references that detail this include the Honda Accord factory service manual and Honda parts catalogues for the 2003–2007 Accord/Accord Euro (CM/CP/CL chassis). These show an upstream air/fuel ratio (A/F) sensor and a downstream heated oxygen sensor (HO2S) on four‑cylinder models, and two of each on the V6. This layout is also required by OBD‑II/EOBD emissions rules, which mandate monitoring both before and after the catalytic converter.
On this Accord, the “oxygen sensor” family is there to help the engine computer keep the fuel mix spot‑on. The upstream A/F sensor tracks how much oxygen is in the exhaust just out of the manifold, letting the ECU trim fuelling in real time for smooth running, tidy emissions, and decent fuel economy. The downstream O2 sensor sits after the catalytic converter and watches how well the cat is cleaning things up, it also helps the ECU run tests and flag faults.
If the 2007 Accord starts drinking more petrol than usual, idles a bit rough, or throws a check engine light with codes like P0134, P0135, P0420, or similar, an ageing sensor could be the culprit. On four‑cylinder cars there’s one sensor before and one after the cat, on V6 cars there’s one pair per bank (so four total). Replacement intervals aren’t a fixed service item in most schedules, but many techs suggest testing or replacing upstream sensors around 160,000–200,000 km, especially if fuel economy has slipped.
- Symptoms of a tired sensor: worse fuel economy, sulphur smell, hesitant acceleration, or a glowing MIL.
- Good servicing habits: fix exhaust leaks first, keep up with air filter and spark plugs, and use quality petrol.
- When replacing: match sensor type (A/F vs HO2S), use a proper O2‑sensor socket, apply the supplied anti‑seize only to the threads, and tighten to the service‑manual spec.
Cleaning is rarely worthwhile, once a sensor is contaminated or slow to respond, replacement is the reliable fix. After fitting, clear codes and run a proper drive cycle so the ECU can complete its monitors. With healthy sensors, a 2007 Accord runs cleaner, uses fewer litres per 100 km, and keeps the catalytic converter happy for the long haul.
Popular questions about the 2007 Honda Accord oxygen sensor
How many oxygen sensors does a 2007 Accord have?
Four‑cylinder models typically have two: one upstream A/F sensor (Bank 1 Sensor 1) and one downstream O2 sensor (Bank 1 Sensor 2). V6 models usually have four: an upstream A/F and a downstream O2 on each bank.
Can a bad oxygen sensor damage the catalytic converter?
Yes. An upstream sensor that’s reading poorly can cause rich running, which overheats and can poison the catalytic converter. Sorting a lazy sensor early often saves the cat and restores fuel economy.
Should the oxygen sensor be cleaned or replaced?
Replacement is the go. Cleaning seldom restores proper response times or accuracy, especially if the sensor is silica or lead contaminated. Fit a quality, correct‑type sensor and reset the ECU monitors.