Parts for your 2007 Holden Captiva 7-Pedal pads

2007 Holden Captiva 7 Pedal Pads — What They Do and When to Replace

Based on technical references including the Holden/GM Global EPC (CG Captiva, 2006–2011, pedal section) and GM Service Information procedures for brake/clutch pedal components, the 2007 Holden Captiva 7 uses removable pedal pads on the service brake pedal and, on manual models, the clutch pedal. These are specified as non-slip rubber covers that press over the metal pedal arms, aligning with ADR braking requirements for safe, slip-resistant pedal surfaces.

On a Captiva 7, pedal pads are there to give solid grip for your shoe, dampen vibration, and protect the pedal arm from wear. Over time, the rubber hardens, smooths off, or cracks. When that happens, grip drops—especially in the wet—so stopping distances and pedal feel can suffer. It’s a small, inexpensive item that makes a noticeable difference to day-to-day driving comfort and safety.

As part of routine servicing, it’s smart to inspect the pedal pads every 10,000–15,000 kilometres or at each service. Look for smoothing to a shiny finish, edge splits, or the pad trying to walk off the pedal. If the pad is glazed or the tread pattern is mostly gone, replace it. Many workshops and parts catalogues list Captiva-specific pads by VIN or transmission type (auto = brake pad only, manual = brake and clutch pads).

• Replacement steps: pop off the old pad (small flat screwdriver helps), clean the bare metal pedal with a cloth, then warm the new pad in hot water for a minute so it’s more flexible. Hook the bottom lip first and work the pad over the pedal until the lip seats all the way around. Check it doesn’t twist.
• Tips: avoid petroleum-based cleaners on rubber, consider light silicone spray on the pedal face to help fitment, and always test pedal feel while stationary before driving.

Manual Captiva 7 owners should replace both brake and clutch pads together for consistent feel. Auto models just need the brake pad. If your Captiva has aftermarket alloy pedal covers, ensure they retain a compliant non-slip insert and are securely fastened—GM SI warns against loose or slippery pedal surfaces. For roadworthy/WOF checks, fresh pedal pads are an easy win if the originals are worn.

Popular questions

Does a 2007 Holden Captiva 7 actually have pedal pads?
Yes. The Holden/GM Global EPC lists rubber pedal covers for the CG Captiva’s brake pedal, with an additional clutch pad on manual variants. GM Service Information also details removal/installation of these pads as service items.

How often should Captiva 7 pedal pads be replaced?
There’s no fixed age, but many owners swap them every 3–5 years, or sooner if the tread wears smooth or the rubber cracks. Inspect at each service and replace at the first sign of reduced grip—especially if you drive in wet, muddy, or sandy conditions.

Are brake and clutch pedal pads the same on a Captiva 7?
They can look similar, but fitment can vary by transmission and trim. Always match by VIN or build date. Auto models only need the brake pad, manual models typically use a matching pair sized for each pedal arm.