Your Selected Vehicle
Parts for your 2007 Holden Captiva 5-Pedal pads
Explore 4WD & Adventure
2007 Holden Captiva 5 pedal pads — what they do and when to replace them
Based on technical sources — including the CG-series Holden Captiva owner’s handbook, GM/Holden Electronic Parts Catalogue listings for the CG Captiva (2006–2011), and platform workshop references shared with Chevrolet Captiva/Opel Antara — the 2007 Captiva range uses removable rubber pedal pads on the brake pedal, and on the clutch pedal for manual models. So yes, pedal pads are relevant and fitted to a 2007 Holden Captiva 5–spec vehicle.
Pedal pads are the grippy rubber covers that sit on the metal pedal arms. Their job is simple but critical: they give the driver a non-slip surface underfoot, especially when shoes are wet or muddy. On a Captiva, that means consistent, confident brake feel (and clutch control on manuals), helping keep stopping distances predictable and preventing the foot from slipping off at the worst possible moment.
As part of routine servicing, it’s smart to check these pads every 10,000–15,000 km, or whenever the cabin’s being detailed. Over time, the rubber hardens, the raised tread blocks wear smooth, and edges crack. Any of that means it’s time to swap them out.
- Signs they need replacing:
- Shiny, smooth or flattened tread on the pad surface
- Cracks, splits, or missing chunks of rubber
- Pad slipping on the metal pedal or feeling loose
- Foot slipping during wet-weather driving
Replacement is a quick DIY job: lever the old pad off the pedal plate and press the new one on, starting with the bottom lip and working around until the rubber fully captures the metal edges. No fancy tools — just fingers or a plastic trim tool. For manuals, do both brake and clutch pads together so the feel matches. If automatic, it’s just the brake pad. Avoid silicone sprays or dressings on the pads, they can make them slippery.
When buying, match the pad to transmission type (auto brake vs manual brake/clutch) and CG-series fitment. Genuine GM/Holden or quality aftermarket equivalents are both fine, provided the pad profile and edge retention are correct. If the pad won’t seat or feels loose, don’t drive until it’s sorted — a secure, textured surface is non-negotiable for safe braking.
Popular questions about 2007 Holden Captiva 5 pedal pads
How long do pedal pads last on a 2007 Captiva?
It depends on driving conditions and footwear, but many Captiva owners see 5–10 years out of a brake pedal pad. High-kilometre or wet, muddy use can shorten that. If the surface looks shiny or cracked, replace rather than guess.
Are the brake and clutch pedal pads the same on manual Captiva models?
They’re typically matched as a pair for size and tread style on manual CG-series cars. Always order for the specific transmission to ensure correct fit and feel. Mixing styles can change pedal feel and grip.
Can a home mechanic replace Captiva pedal pads?
Absolutely. It’s a straightforward, low-risk job that takes a few minutes. Ensure the new pad fully captures the pedal plate all the way around. If it won’t seat or sits crooked, remove and refit until it’s snug and secure.
