Parts for your 2007 Ford Transit-Steering bushes

2007 Ford Transit steering bushes

Yes, steering bushes are used on the 2007 Ford Transit (Mk7, V347/V348). Ford’s workshop information for the Transit steering gear details rubber/insulated mounts for the rack, and multiple aftermarket catalogues list “steering rack mounting bushes” specifically for 2006–2014 Transit models. Technical sources commonly cited by trade workshops include Ford eTIS/workshop manual sections for the steering gear, plus OE-equivalent listings from brands like Febi Bilstein and SuperPro/Polybush that supply rack mounting bushes for this generation Transit. So “steering-bushes” are absolutely relevant on a 2007 Ford Transit.

On this model, the steering bushes support and isolate the power steering rack from the subframe, keeping the rack securely located while soaking up vibration. When they’re in good nick, steering feel stays tight, straight-line tracking is stable, and knocks over bumps are kept to a minimum. As they wear or perish, the rack can shift under load, which shows up as vague steering, clunks over potholes, and sometimes uneven tyre wear because toe can change as the rack moves around.

As part of regular servicing, it’s wise to inspect the bushes annually or every 20,000 km—more often if the van does heavy loads or corrugated/gravel driving. Look for cracking, separation, or excessive softness, and check for rack movement while an assistant rocks the steering wheel. If there’s visible play at the rack mounts, the bushes are due.

Replacement is straightforward workshop fare: the rack is supported, old bushes are pressed out, and new ones are installed in the correct orientation before everything is torqued to spec. Some variants can have at least one bush done in situ with the right tooling, though removal of the rack may be the better route for access. It’s smart to:

• Use quality OE-equivalent or performance polyurethane bushes if a firmer feel is preferred.
• Inspect related parts at the same time—tie rod ends, lower control arm bushes, and sway bar links/bushes.
• Book a wheel alignment after any steering bush work.

Getting onto worn steering bushes early keeps the Transit tracking true, quiet over bumps, and kinder on tyres—ideal for Aussie and Kiwi roads where vans cop a tough life.

Popular questions

What are the signs the steering rack bushes are worn on a 2007 Transit?
Common signs include a clunk or knock over speed humps and potholes, vague or wandering steering on the motorway, and a slight kickback through the wheel. A mechanic may spot the rack shifting on its mounts when the wheel is rocked side to side on the hoist. Uneven inner or outer tyre wear can also show up if the rack is moving under load.

How often should the steering bushes be replaced?
There’s no fixed interval, it depends on use and conditions. Many last well past 100,000 km in light-duty metro work, but vehicles that see heavy loads, rough roads, or lots of kerb hopping may need bushes earlier. Including them in an annual inspection is the best approach—replace when cracked, perished, or showing measurable movement.

Can the bushes be replaced without removing the rack?
On some Transit setups, one or more bushes can be pressed in and out with the rack still in the vehicle if there’s enough clearance and the correct press tools are used. However, access varies, and removing the rack can save time overall and helps ensure correct seating and torque of all mounts. Always follow workshop specs and finish with a wheel alignment.