Parts for your 2007 Ford Territory-Pedal pads

2007 Ford Territory pedal pads

Based on Ford Australia SY/SY II workshop and service literature, plus parts catalogue listings for 2005–2009 Territory models, the 2007 Ford Territory is fitted with a replaceable rubber brake pedal pad. The accelerator pedal is a moulded assembly without a separate rubber cover, there’s no clutch pedal (the Territory was automatic-only), and many variants use a foot‑operated park brake pedal that also carries a rubber pad. So pedal pads are absolutely relevant on this model.

On a 2007 Ford Territory, the pedal pad’s job is simple but vital: it provides a grippy, cushioned surface so the driver’s shoe doesn’t slip at the exact moment they need precise brake control. The ribbed rubber face sheds water and mud, and the pad itself adds a little comfort by reducing harshness through the sole. That grippy surface is a small piece of safety kit that pays its way every time it rains or after a beach run.

This Territory runs an automatic, so there’s no clutch pad to worry about. The brake pedal uses a replaceable rubber cover, and on models with a foot‑operated park brake, that pedal also has a separate pad. The accelerator pedal is a one‑piece moulded item, if it’s worn or damaged, the whole pedal assembly is typically replaced rather than “re-padded”.

As part of routine servicing, it’s worth inspecting the brake (and park brake) pad every 10–15,000 kilometres. Look for smooth, shiny spots, hardening, cracks, tears, or a pad that’s starting to work loose from the pedal plate. A missing or slippery pad can attract attention at WOF/roadworthy time and, more importantly, it’s a genuine safety risk. Keep the pads clean with mild soapy water and a soft brush, avoid solvents or petroleum products that can dry or swell the rubber.

Replacement is quick and driveway‑friendly. Most owners can fit a new pad in a few minutes:

• Confirm the correct pad for brake (and park brake, if fitted).
• With the vehicle safely parked, pull off the old pad.
• Warm the new pad slightly (sunlight helps), then hook the top lip over the pedal and work it on until the rubber flange fully seats around the metal plate.
• Press the pedal a few times to check for secure fit and proper grip.

If a pad repeatedly loosens or the pedal plate is bent, it’s time for a closer inspection by a technician.

Popular questions about 2007 Ford Territory pedal pads

Does the 2007 Ford Territory have a clutch pedal pad?
No. The 2007 Territory was sold with automatic transmissions, so there’s no clutch pedal to cover. Owners will generally only need to consider the brake pedal pad, and the park brake pedal pad on vehicles equipped with a foot‑operated park brake.

How often should the brake pedal pad be replaced?
There’s no fixed interval. Replace it when the rubber is smooth, hard, cracked, torn, or loose. A quick look at every service (about every 10–15,000 kilometres) keeps things simple, especially if the vehicle sees wet, muddy or sandy conditions.

Can alloy or dress-up pedal covers be used?
Aftermarket covers are fine if they’re secure and provide equal or better grip than the factory rubber. If the cover is slippery or poorly attached, it could affect roadworthy/WOF inspections and, more importantly, braking safety. Choose kits designed for the Territory’s pedal shape and follow the fitting instructions closely.