Parts for your 2006 Toyota Vitz|yaris-Suspension bushes

2006 Toyota Vitz/Yaris suspension bushes – purpose, wear, and when to replace

Suspension bushes are absolutely fitted to the 2006 Toyota Vitz/Yaris (XP90 series). Toyota’s service literature for the NCP90/NCP91/NCP93 platform details rubber bushes in the front lower control arms, the front stabiliser (sway) bar, and the rear torsion beam. The Toyota Electronic Parts Catalogue lists these bush components across those locations, and common aftermarket fitment catalogues (e.g., SuperPro and Whiteline) publish direct-replacement bush kits for this exact model and year range. These technical references confirm the vehicle relies on multiple bushes to locate arms and the beam while isolating noise, vibration, and harshness.

On this Vitz/Yaris, the bushes allow controlled movement where arms pivot, keeping wheel alignment stable while soaking up road harshness. They reduce vibration through the cabin, prevent metal-on-metal contact, and help the car track straight. When healthy, they make the little Toyota feel tight, quiet, and predictable over Aussie and Kiwi roads.

Over time, rubber hardens, cracks, or tears—especially with age, potholes, or coastal climates. Typical signs of tired bushes include:

• Clunks or thuds over speed bumps and potholes
• Steering wander or tramlining, vague turn-in
• Uneven or rapid tyre wear, pull under brakes
• Squeaks or groans at low speed, visible cracking around bush shoulders

Good practice for this model is to inspect bushes every service or 10,000–15,000 km. A visual check for perishing and a lever test for excess movement are quick and telling. When replacing, it’s smart to do both sides on the same axle for balanced handling. Torque all pivot bolts at normal ride height to avoid preloading the rubber. A wheel alignment is essential afterward, as new bushes restore original geometry.

Owners can choose OE-style rubber for comfort and factory NVH, or quality polyurethane for sharper response and durability (with a slight increase in road feel). Front lower control arm bushes and front stabiliser D-bushes are common wear points