Parts for your 2006 Toyota Vitz|yaris-Headlight bulbs

2006 Toyota Vitz/Yaris Headlight Bulbs

Headlight bulbs are absolutely relevant to the 2006 Toyota Vitz/Yaris. Toyota’s owner’s manual and service literature for the XP90 series show the car uses replaceable headlight bulbs: most trims run halogen (commonly a single H4 dual‑filament bulb, or separate H11 low beam and HB3/9005 high beam depending on market), and some higher grades were available with factory HID bulbs. Toyota’s repair manuals and parts catalogues back this up, noting replaceable light sources rather than sealed units.

On this model, the headlight bulbs do the heavy lifting after dark—low beam for everyday night driving and high beam for open‑road visibility. Clear, correctly aimed lights are also essential for WOF/roadworthy checks across NZ and Australia. As part of routine servicing, it’s smart to inspect beam brightness, lens clarity and aim, and to replace bulbs in pairs so colour and output stay even.

Replacement is straightforward on halogen setups. With the ignition off, pop the bonnet, reach behind the headlamp, remove the dust cover, unplug the connector and release the spring clip or twist‑lock. Swap in the new bulb without touching the glass (use clean gloves), refit everything, then test both beams. Stick to the specified wattage—typically 55/60 W for H4 or 55 W for H11—because higher‑wattage units can overheat wiring and housings. Premium “+” performance halogens can boost brightness, but expect a shorter lifespan.

If the car has factory HID, there’s high voltage at the ballast