Your Selected Vehicle
Parts for your 2006 Toyota Ractis-Tail lights
Repco 12-24V LED Rear Combination Lamp Stop/Tail/Ind/Rev 100X275X22mm - RLT275STIR
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable - 97010-1
Fitment Notes:
LED Autolamps 355 Series Multi Volt Black Stop/Tail/Indicator/Reverse/Reflector LHS & RHS Twin Blister Pack - 355BARWM-2
Fitment Notes:
LED Autolamps 12/2V Maxilamp LED Stop/Tail/Indicator/Reflector Black Chrome Bolt Mount - MAXILAMPC1XCE
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator With 18 Square LEDs Twin Blister - 135ARM/2
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator/Reverse Assembly Clear Lens Chrome Bracket - 82CARW
Fitment Notes:
Explore 4WD & Adventure
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly With 123 LEDs - 100BARWM
Fitment Notes:
Stedi C-4 Black Edition LED Light Cube Diffused Pattern 4 LED Work Light - LEDWORK-C4-DIFFUSE
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse/Reflector Mini Jumbo Twin Blister - 420ARRWM2
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator/Reverse Assembly Chrome Bracket Blister Pack - 82CARRW
Fitment Notes:
Stedi C-4 Black Edition Flush Mount 4 LED Work Light Flood Beam - LEDFLUSH-C4-FLOOD
Fitment Notes:
LED Autolamps MultiVolt R.H.S Stop/Tail/Indicator Assembly 128 Round LEDs - 125BARMR
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Assembly 72 LEDs With Black Bracket - 200BARM
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Assembly 72 LEDs With Black Bracket 190x100x28mm - 80BARM
Fitment Notes:
Narva 9-33 Volt LED Reverse (White) With Red LED Tail Ring, 155mm Contoured Chrome Cover - 95628
Fitment Notes:
LED Autolamps RHS, Stop/Tail/SEQ-Indicator/Reverse/Reflector 12/24V 284 X 100 X 37mm, DT04 Connector - SO284RHS
Fitment Notes:
LED Autolamps LHS, Stop/Tail/SEQ-Indicator/Reverse/Reflector 12/24V 284 X 100 X 37mm, DT04 Connector - SO284LHS
Fitment Notes:
9-33 Volt LED Reverse, Rear Direction Indicator and Stop Lamps with LED Tail Rings - 94365C
Fitment Notes:
LED Autolamps Rear Taillight Harness To Suit MY22 Ranger / MY20 Ram Plug To Bare Wires - PATCH-RAM.UNI
Fitment Notes:
9-33 Volt LED Rear Direction Indicator and Twin Stop Lamps with LED Tail Rings - 94364C
Fitment Notes:
LED Autolamps 385 Series Rear Combination Lamp LHS with 7 core plug - 385ARWMLCSB
Fitment Notes:
LED Autolamps 385 Series Rear Combination Lamp RHS with 7 core plug - 385ARWMRCSB
Fitment Notes:
Tail Lights on the 2006 Toyota Ractis: Important Info and Maintenance Tips
The 2006 Toyota Ractis comes equipped with tail lights as a fundamental part of its lighting system. Tail lights play a crucial role in vehicle safety, especially when it comes to visibility during night driving or adverse weather conditions. If you own a 2006 Toyota Ractis, understanding what tail lights do and how to properly maintain or replace them will keep you safe and ensure your vehicle complies with Australian road laws.
Tail lights are the red lights located at the rear corners of the vehicle. They are designed to illuminate whenever the headlights or parking lights are turned on. This means that as dusk falls or when driving through dimly lit areas, the tail lights automatically come on to make the car visible to other road users from behind.
Beyond simply being there to light up the back of your Ractis, tail lights have an important signalling function. When the driver applies the brakes, the tail lights brighten up significantly to alert other drivers that the car is slowing down or stopping. This feature helps prevent rear-end collisions, which are unfortunately common in traffic jams or sudden stops.
Modern tail lights, including those on the 2006 Toyota Ractis, often incorporate additional elements like rear fog lights and turn indicators. The rear fog lights help enhance visibility during heavy rain or fog, offering an extra layer of protection. Turn indicators inside or adjacent to the tail light assembly signal lane changes or turns, communicating your intentions clearly to drivers around you.
Because tail lights are so important for road safety, regular checks and maintenance should be part of your vehicle servicing routine. A common problem with tail lights is blown bulbs. Over time, the filament in the bulbs can wear out, or poor electrical connections might cause one or more of the lights to stop working. Driving without functioning tail lights is not only dangerous but also illegal under Australian road rules, and you risk fines or penalties if caught.
Checking your tail lights is pretty straightforward. At night, stand behind your Ractis or get a mate to help and ensure both tail lights are glowing evenly and brightly. If you notice any dimming or flickering, it may be time to replace the bulbs. Many tail light assemblies on the Ractis use standard 12V bulbs, which are easy to source and replace. However, it is recommended to replace bulbs in pairs to ensure even lighting, which helps maintain balance and visibility.
If you need to swap a tail light bulb, the process typically involves accessing the rear light cluster inside the boot of the car. Remove the trunk lining or any covering to reach the bulb holder, twist or unclip it out, then replace the faulty bulb with a new one. Be sure to use gloves or a cloth when handling new bulbs to avoid transferring oils from your fingers, which can shorten the bulb's life.
Aside from bulb replacement, it's worth checking the tail light lens itself during servicing. The lenses on the 2006 Toyota Ractis are made of plastic, which can dull or become cloudy over time due to exposure to sunlight or minor scratches. This reduces the brightness of the lights and can affect how visible your vehicle is to others. If the lens is badly damaged or faded, replacing the entire tail light assembly might be the best option to restore full brightness.
Electrical issues can sometimes cause tail light malfunctions too. Corrosion on contacts, wiring faults, or blown fuses can interrupt the power supply. When diagnosing tail light problems, a qualified mechanic can perform tests to check the vehicle's wiring and replace faulty components as needed to keep your lights in top condition.
Taking good care of your 2006 Toyota Ractis tail lights also means keeping them clean. Dirt, mud, or grime build-up on the tail light lenses will reduce their effectiveness. Giving them a regular wipe down with a damp cloth during car washes ensures maximum light output and maintains the car's tidy appearance.
Incorporating tail light checks into your regular vehicle servicing not only enhances safety but can also be a money saver. Catching issues early means smaller repairs and avoiding fines for non-compliance. Whether it is just swapping out a bulb, cleaning the lens, or addressing wiring issues, keeping your tail lights in good shape will keep your Toyota Ractis roadworthy and safe for the long haul.