Your Selected Vehicle
Parts for your 2006 Toyota Crown-Batteries
Narva Holden Style Sealed Push Switch Off/On SPDT 12V Blue LED Illuminated Driving Lights Symbol (Contacts Rated 3A @ 12V) - 63340BL
Narva Holden Style SeaLED Push Switch Off/On Spdt 12V Blue LED Illuminated LED Light Bar Symbol (Contacts Rated 3A @ 12V) - 63338BL
Narva Holden Style Sealed Push Switch Off/On SPDT 12V Blue LED Illuminated Light Bar Symbol (Contacts Rated 3A @ 12V) - 63326BL
Narva Mitsubishi Style Sealed Push Switch Off/On SPDT 12V Blue LED Illuminated LED Light Bar Symbol (Contacts Rated 3A @ 12V) - 63362BL
Narva OE Style Sealed Push Switch Off/On SPDT 12V Blue LED Illuminated Aux Lights Symbol (Contacts Rated 3A 12V) - 63318BL
Narva Holden Style Sealed Push Switch Off/On SPDT 12V Blue LED Illuminated Driving Lights Symbol (Contacts Rated 3A @ 12V) - 63328BL
Narva Holden Style Sealed Push Switch Off/On SPDT 12V Blue LED Illuminated Aux Lights Symbol (Contacts Rated 3A 12V) - 63342BL
Narva OE Style Sealed Push Switch Off/On SPDT 12V Blue LED Illuminated Roof Lights Symbol (Contacts Rated 3A @ 12V) - 63320BL
Narva Nissan Style Sealed Push Switch Off/On SPDT 12V Blue LED Illuminated Driving Lights Symbol (Contacts Rated 3A @ 12V) - 63376BL
Narva Mitsubishi Style Sealed Push Switch Off/On SPDT 12V Blue LED Illuminated Driving Lights Symbol (Contacts Rated 3A @ 12V) - 63364BL
Narva OE Style Sealed Push Switch Off/On SPDT 12V Blue LED Illuminated Beacon Symbol (Contacts Rated 3A 12V) - 63322BL
Narva Nissan Style Sealed Push Switch Off/On SPDT 12V Blue LED Illuminated LED Light Bar Symbol (Contacts Rated 3A @ 12V) - 63374BL
Narva Nissan Style Sealed Push Switch Off/On SPDT 12V Blue LED (Contacts Rated 3A @ 12V) - 63372BL
2006 Toyota Crown batteries — what they do and how to look after them
Based on Toyota service information for the S180-series Crown (2003–2008) and OEM parts catalogues for this model year, the 2006 Toyota Crown is fitted with a conventional 12‑volt lead‑acid starting battery. So yes — batteries are absolutely relevant to the 2006 Toyota Crown.
On a 2006 Crown, the battery’s job is to crank the engine, stabilise system voltage, and keep the essentials alive — ECU, immobiliser, clock, audio presets, interior lights and more. Once the engine’s running, the alternator takes over charging duties, but that first spark of life always comes from the battery. A healthy battery also smooths out voltage dips so electronics behave properly.
Expect a typical lifespan of around 3–5 years in Australian and New Zealand conditions, shorter if it sees lots of short trips, heat, or heavy accessory use. Handy signs it’s getting tired include a slower crank, dimming lights at idle, clock resets, or the need for the odd jump-start. A yearly battery and charging-system test (including a proper load/CCA test) is smart preventative maintenance — especially before winter or a long roadie.
- Pick the right unit: match the physical size and terminal layout, and choose equal or higher CCA and reserve capacity than the original. The Crown of this era typically uses a JIS-size battery, quality flooded lead‑acid is fine, while AGM is optional if extra resilience is wanted.
- Replacement tips: use a memory saver if you want to keep radio presets, clean the tray and clamps, fit the hold‑down securely, connect positive first, then negative, lightly grease terminals, and avoid over‑tightening. After reconnecting, let it idle so the ECU can relearn — some vehicles may need window auto‑up reset.
- Care between services: keep terminals clean and tight, ensure the battery stays above ~12.4 V when parked, and throw a smart charger on it if the car does lots of short hops. If it’s a serviceable battery, only top up with deionised/distilled water. Confirm alternator output sits around 13.8–14.7 V with the engine running.
When the old unit’s done, recycle it through an authorised battery recycler. A well-chosen, well-maintained battery keeps the 2006 Crown starting first time and running without electrical gremlins.
What battery type and specs suit a 2006 Toyota Crown?
The 2006 Crown uses a 12‑volt lead‑acid starting battery. Match the JIS case size and terminal orientation used in your trim, and aim for equal or higher cold‑cranking amps and reserve capacity than factory. Many owners target around 55–70 Ah and 500–650 CCA, but always confirm against the vehicle label or owner’s manual.
How often should the battery be replaced?
Most last about 3–5 years in AU/NZ. Heavy heat, short trips, and high accessory loads shorten life. Test annually and before big trips, if cranking slows or test results dip below spec, replace proactively to avoid being stranded.
Does the 2006 Crown need an AGM battery?
Not required. A quality flooded lead‑acid battery meets the vehicle’s needs. AGM can be used if extra vibration resistance, reserve capacity or spill protection is desired, but it isn’t mandatory for this model year.