Parts for your 2006 Toyota Camry-Pedal pads

2006 Toyota Camry Pedal Pads

Based on technical references including the Toyota Electronic Parts Catalogue (listing “Pad, Brake Pedal” for the 2002–2006 Camry XV30/ACV36–MCV36), the Toyota Repair Manual for Brake System, and NZTA WOF/VIRM inspection guidance on pedal rubbers, pedal pads are fitted to the 2006 Toyota Camry. Automatic models use a removable rubber pad on the brake pedal, manual models also have a clutch pedal pad. The accelerator is typically a solid pedal assembly without a separate rubber pad.

On a 2006 Camry, pedal pads are simple but vital bits of kit. They provide grippy, compliant surfaces for the foot, helping stop slips in the wet, reducing fatigue on longer drives, and keeping the car compliant for rego/WOF. Quality rubber pads also buffer vibration and wear evenly, protecting the bare metal pedal plate from corrosion and sharp edges.

Servicing-wise, pedal pads deserve a quick look whenever the car is in for brakes, tyres, or a WOF check. If the pad has gone hard and shiny, is cracked, or the edges are curling, it’s time to replace. They’re inexpensive and install in minutes, making them one of the easiest safety wins on the Camry.

• Signs it’s due: smooth or slippery surface, visible splits, missing corner lugs, or the pad moving on the pedal.
• Compliance cue: many WOF/roadworthy checks require the brake pedal to have a secure, non-slip pad.
• Fitment note: auto = brake pad only, manual = brake and clutch pads. Use pads matched to XV30 Camry for proper retention.

1. Clean the metal pedal face with a rag to remove grit.
2. Warm the new pad slightly (sunlight helps) so it’s more pliable.
3. Hook the top lip over the pedal plate, then work the sides and bottom on.
4. Confirm all edges are fully seated in the groove—no gaps.
5. Test in the driveway with dry shoes to confirm grip and stability.

• Care tip: wipe pads with a mild detergent solution, avoid silicone dressings that make them slippery.
• Avoid thick, novelty covers that can foul adjacent trim or reduce pedal feel.
• If the pad repeatedly works loose, inspect the pedal plate for bent edges or damage.

A well-fitted pedal pad keeps the Camry feeling surefooted, especially on rainy Aussie and Kiwi roads, and helps keep inspectors happy at WOF or rego time.

Popular questions

Does the 2006 Camry’s accelerator pedal have a removable pad?
The accelerator on most 2006 Camry models is a one-piece pedal assembly without a separate rubber pad. The removable pads are on the brake (all) and clutch (manual) pedals. If the accelerator surface is worn or damaged, the usual fix is replacing the pedal assembly rather than a pad.

How often should the brake pedal pad be replaced?
There’s no fixed kilometre interval—replace on condition. If the rubber is shiny, hard, cracked, or slippery when wet, swap it out. Many owners change the brake pedal pad every few years, often alongside brake servicing, to maintain a confident, grippy pedal and avoid WOF or roadworthy hassles.

Are Camry pedal pads universal across years?
Some Toyota pads interchange, but it’s best to use pads specified for the XV30 (2002–2006) Camry and the correct transmission type. That ensures the retaining lips match the pedal plate and the pad won’t slip or pop off, especially under heavy braking.