Parts for your 2006 Suzuki Swift-Pedal pads

2006 Suzuki Swift Pedal Pads — What They Do and When to Replace Them

Based on technical references including the Suzuki Electronic Parts Catalog for the Swift (RS413/RS415, model years 2005–2010) and the factory workshop/service manual maintenance checks, pedal pads are indeed used on the 2006 Suzuki Swift. The brake pedal has a replaceable rubber pad on both automatic and manual models, while manual models also have a separate clutch pedal rubber pad. The accelerator is typically a moulded pedal assembly, not a slip-on rubber pad.

On a 2006 Swift, pedal pads are simple but important safety items. They’re the grippy rubber covers that sit over the metal brake and clutch pedals, giving the driver solid traction underfoot — especially in the wet. Over time, the rubber can harden, smooth out, crack, or even peel at the corners. When that happens, it’s easier for shoes to slip, pedal feel gets vague, and a WOF or roadworthy inspection can flag it.

As part of regular servicing, it’s smart to check the condition of the pads every 10,000–15,000 km or at each service interval. If the surface looks shiny or bald, the edges are frayed, or the pad feels hard and plasticky, it’s time to swap them. For manual Swifts, assess both brake and clutch, for autos, focus on the brake pedal. The accelerator usually doesn’t have a removable pad — if it’s damaged, it’s generally a full pedal replacement.

Replacement is straightforward and can be done at home: gently pry off the old rubber, clean the metal pedal face (remove any rust and dry thoroughly), then work the new pad on starting from one edge. A dab of warm water with a drop of dish soap helps the rubber seat properly — avoid grease or silicone that could make things slippery. Make sure the lip of the pad is fully wrapped around the pedal plate with no corners lifting.

In Aussie and Kiwi conditions where rain, beach trips, and coarse road dust are common, the pads can wear quicker. Fresh pads sharpen pedal feel, reduce slip risk, and keep the Swift right for WOF/roadworthy checks. Stick with quality OEM or equivalent pads that match your transmission type and pedal shape for the best fit.

• Signs it’s time: smooth/glossy surface, cracking, hard rubber, edges lifting, or slipping underfoot.
• Manual: replace brake and clutch pads. Automatic: replace brake pedal pad only.
• Check each service, replace as needed rather than by a strict kilometre figure.

Popular questions about 2006 Suzuki Swift pedal pads

Which pedal pads fit a 2006 Suzuki Swift?
Fitment depends on transmission. Manual models use separate brake and clutch rubber pads, automatics have a single brake pedal pad. The accelerator is a moulded pedal, not a slip-on pad. The best match is by VIN or chassis code (RS413/RS415) and pedal shape, using genuine Suzuki or quality OEM-equivalent parts.

How often should the pedal pads be replaced?
There’s no fixed interval — replace them when worn smooth, cracked, hard, or if they cause slipping or fail a WOF/roadworthy. Checking them at each service is good practice. Many owners find they last several years, but high kilometres, wet weather, and sandy or gritty use can speed up wear.

Can they be replaced at home?
Yes. Removing the old pad and pressing on a new one is a quick DIY. Clean the pedal plate, use warm soapy water to help the new pad seat, and ensure the rubber lip fully captures the pedal. Don’t use oils or grease — anything slippery on a pedal is a safety risk.