Parts for your 2006 Mitsubishi Pajero-Wheel hubs

2006 Mitsubishi Pajero wheel hubs

Wheel hubs are fitted to the 2006 Mitsubishi Pajero. This is confirmed in Mitsubishi’s Pajero/Montero Workshop Manual for the V60/V70 series (2000–2006, Chassis Groups 26 and 27 – Front and Rear Axle), which details hub and bearing construction, ABS tone rings, and service procedures. The Mitsubishi ASA/CAPS electronic parts catalogue for the V60/V70 Pajero also lists front and rear hub/bearing components for 2006 models. Independent aftermarket technical guides (e.g., Haynes Pajero/Montero/Shogun 2000–2013) and bearing manufacturer catalogues likewise specify hub/bearing units for this vehicle. Note: the Pajero’s Super Select 4WD II uses drive flanges rather than manual free-wheeling hubs, but the vehicle still has conventional wheel hubs at each corner.

The wheel hubs on a 2006 Pajero do the heavy lifting: they centre the wheel, house the wheel bearing, provide the mounting face for the brake disc, and carry the ABS tone ring. At the front, the hub is splined to the CV shaft