Your Selected Vehicle
Parts for your 2006 Mitsubishi Lancer-Pedal pads
Explore 4WD & Adventure
2006 Mitsubishi Lancer pedal-pads — what they do and when to replace them
Technical sources confirm the 2006 Mitsubishi Lancer is fitted with pedal-pads. The Mitsubishi ASA Electronic Parts Catalogue for the CH/CG Lancer (approx. 2002–2007) lists removable rubber pads for the brake pedal (and clutch on manual models). The Mitsubishi Motors workshop manual for these models also includes inspection and replacement of brake/clutch pedal pads as a routine service check. Roadworthiness guidance used in Australia (RWC) and New Zealand (WoF) also expects a non-slip surface on the service brake pedal, which the pad provides.
On a 2006 Lancer, the pedal-pad is a grippy rubber cover that slips over the metal pedal plate. Its job is simple but important: it gives the driver reliable shoe grip in the wet, reduces vibration, and protects the pedal face from wear. Manual Lancers run two pads — brake and clutch — while automatic versions have a pad on the brake only, the accelerator is typically a moulded pedal without a separate rubber pad.
As part of normal servicing, it’s worth inspecting the pedal-pads every 10,000–15,000 kilometres. Rubber hardens and polishes over time, especially with sandy beaches, ski trips, or tradie boots in the mix. If the surface goes smooth or the edges crack, grip drops and stopping control can be compromised — something both RWC and WoF inspectors look for.
- Signs it’s time to replace: smooth or shiny tread, cracking or splits, curled edges, pad slipping on the pedal, or chunks missing.
- Good practice: keep pads clean with mild soapy water, avoid silicone dressings that make them slippery.
- Peel off the old pad from the metal pedal face.
- Clean the pedal plate so it’s free of grit and residue.
- Warm the new pad in hot water for a minute to soften.
- Hook the top lip on first, then work the pad over the pedal until the rubber lip seats all the way around.
- Press all edges to confirm it’s fully seated and secure.
Genuine and quality aftermarket pedal-pads are inexpensive and quick to fit. Make sure you choose the correct pad for manual vs automatic. Replacing worn pads restores feel underfoot, keeps the Lancer compliant for roadworthy/WoF checks, and helps ensure confident braking in Aussie and Kiwi conditions.
FAQs
Do all 2006 Mitsubishi Lancers have pedal-pads?
Yes. The brake pedal has a removable rubber pad on both auto and manual models, manual cars also have a clutch pedal-pad. The accelerator is generally a one-piece pedal without a separate pad.
How often should pedal-pads be replaced?
There’s no strict interval, but many owners replace them when the surface goes smooth, cracked, or slippery — often somewhere between 60,000 and 120,000 kilometres, sooner with heavy use or harsh conditions.
Are manual and automatic pedal-pads the same?
The brake pad usually matches across both, but only the manual has a clutch pedal-pad. Always order by VIN or model details to get the correct fit.
