Parts for your 2006 Mazda Cx-7-Pedal pads

2006 Mazda CX-7 Pedal Pads

Based on Mazda’s technical documentation, pedal pads are indeed used on the 2006 Mazda CX-7. The Mazda CX-7 Workshop Manual for the ER model details the brake pedal assembly and its serviceable rubber pad, and the Mazda Electronic Parts Catalogue (EPC) lists a “Pad, Brake Pedal” for this vehicle. The accelerator pedal on this model is an electronic pedal module (APP sensor) with an integral tread and no separate pad, and there’s no clutch pad because the 2006 CX-7 was supplied with an automatic transmission.

On the 2006 CX-7, the brake pedal pad is the grippy rubber cover your foot contacts. Its job is simple but important: provide secure traction in wet or dusty conditions, add comfort, protect the metal pedal face, and keep the vehicle compliant for roadworthy or WOF inspections. Over time, heat, sand, and everyday use can harden or polish the rubber, reducing grip right when it’s needed most.

Servicing tips for CX-7 brake pedal pads:

• Inspect at every service or 10,000–15,000 km. Look for smooth, shiny spots, cracking, hardening, curling edges, or a pad that feels loose on the pedal.
• Clean occasionally with mild soapy water and a soft brush. Avoid silicone, tyre shine, or solvent sprays that can make the surface slippery.
• Replace the pad if grip is reduced or the pad is perished. In Aussie and Kiwi conditions this often happens somewhere between 80,000 and 150,000 km, but beach driving, work boots, and heat can bring that forward.

Replacement on the CX-7 is a straightforward driveway job. With the engine off, pull the old pad from the pedal plate, clean the metal face, then warm the new pad slightly (sunlight or warm water helps) and work the lip evenly over the pedal plate so it seats all the way around. After fitting, sit in the driver’s seat, press the brake to confirm a solid feel, check brake light operation, and make sure the floor mat can’t slide up under the pedal. Sticking with a genuine or quality aftermarket pad ensures the correct thickness and edge profile, which helps pedal feel and reliability. It’s a small, inexpensive part that makes a big difference to confidence behind the wheel.

Popular questions

Does the 2006 Mazda CX-7 have pedal pads on both pedals?
The 2006 CX-7 has a removable rubber pad on the brake pedal only. The accelerator is an electronic pedal module with a built-in tread and no separate pad, and there’s no clutch pedal on this model year because it was sold with an automatic.

How often should the brake pedal pad be replaced on a CX-7?
There isn’t a fixed interval, it’s condition-based. Inspect at each service. Many owners replace the pad somewhere around 80,000–150,000 km, sooner if it’s slippery, cracked or hardened, or if roadworthy/WOF checks flag it.

Is replacing the CX-7 brake pedal pad a DIY job?
Yes. It usually takes a few minutes with no tools. Remove the old pad, clean the pedal plate, then stretch the new pad over the edges. Warm rubber seats more easily. After fitting, confirm brake light operation and that the mat can’t interfere with the pedal.