Skip to content Skip to navigation menu

Your Selected Vehicle

Parts for your 2006 Lexus Is-Wiper refills

Sort by
Showing 1 - 4 of 4 products

2006 Lexus IS Wiper Refills

Wiper refills are absolutely relevant and used on the 2006 Lexus IS (IS 250/IS 350, XE20). Technical sources back this up: the Lexus Owner’s Manual for the 2006 IS models includes a do-it-yourself section showing how to replace the blade rubber on the factory wiper frames, and the Toyota/Lexus Electronic Parts Catalogue lists dedicated “Refill, Windshield Wiper” items for this vehicle. That confirms the car was designed to accept replacement rubber inserts in the original blade assemblies.

On this model, swapping the rubber inserts is a tidy, cost-effective way to keep the windscreen clear without binning the whole blade. The purpose of a wiper refill is simple: it’s the working edge that actually clears water, road film, and bug splatter. Fresh rubber dramatically improves visibility, reduces chatter, and protects the glass from scuffing. In Aussie and Kiwi conditions—UV, salt air near the coast, and dust inland—rubber ages faster, so keeping on top of refills makes a real difference.

As a rule of thumb, check the wiper refills every service and plan on replacing them about every 6–12 months, or 15,000–20,000 km. Many 2006 IS cars run a driver’s side around 600 mm (24 in) and a passenger side around 475 mm (19 in), but always confirm against the owner’s manual or a trusted parts guide to match the exact length and profile.

  • Tell-tales it’s time: streaking, missed patches, judder, or a squeal on a wet screen.
  • Care tips: clean the windscreen often, wipe the rubber with a damp cloth, use washer fluid (never run them dry), and lift the arms gently.

Refill replacement is straightforward on the original Lexus blades: slide the old rubber out, transfer any metal backing rails if required, then feed the new refill along the channels until it locks at the end clip. If the factory blade frames are bent or you’ve swapped to aftermarket beam/aero blades, note that some of those don’t accept refills—go for complete blade assemblies in that case.

Sticking with OEM-style refills reduces waste, saves cash, and keeps the 2006 Lexus IS looking and wiping like it should—crisp, quiet, and clear when the weather turns.

  • Popular questions about 2006 Lexus IS wiper refills

What size wiper refills does a 2006 Lexus IS use?
Most 2006 IS models take roughly 600 mm (24 in) on the driver’s side and 475 mm (19 in) on the passenger side. Always check the handbook or a parts application guide against your VIN to confirm length and refill profile.

How often should wiper refills be replaced in Australia or New Zealand?
Plan on 6–12 months depending on exposure to sun, salt, dust, and how often the car’s garaged. If you notice streaks, noise, or judder, it’s time—don’t wait for the next service.

Can aftermarket blades on a 2006 Lexus IS still use refills?
Some can, many can’t. Several beam/aero-style aftermarket blades are sealed units with no refill channel. If your current blades don’t accept inserts, replace the full blade assembly or refit OEM-style frames that take refills.

{ "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "What size wiper refills does a 2006 Lexus IS use?", "acceptedAnswer": { "@type": "Answer", "text": "Most 2006 IS models take roughly 600 mm (24 in) on the driver’s side and 475 mm (19 in) on the passenger side. Always check the handbook or a parts application guide against your VIN to confirm length and refill profile." } }, { "@type": "Question", "name": "How often should wiper refills be replaced in Australia or New Zealand?", "acceptedAnswer": { "@type": "Answer", "text": "Plan on 6–12 months depending on exposure to sun, salt, dust, and how often the car’s garaged. If you notice streaks, noise, or judder, it’s time—don’t wait for the next service." } }, { "@type": "Question", "name": "Can aftermarket blades on a 2006 Lexus IS still use refills?", "acceptedAnswer": { "@type": "Answer", "text": "Some can, many can’t. Several beam/aero-style aftermarket blades are sealed units with no refill channel. If your current blades don’t accept inserts, replace the full blade assembly or refit OEM-style frames that take refills." } } ]}