Your Selected Vehicle
Parts for your 2006 Honda Elysion-Exterior bulbs
2006 Honda Elysion exterior bulbs
Exterior bulbs are very much fitted to the 2006 Honda Elysion. Honda’s owner’s manual and service literature for the JDM Elysion (RR1–RR4 series) list multiple exterior lamp globes across the vehicle, including headlamps, front and rear indicators, tail/stop lamps, reversing lamps, fog lamps and number plate lamps. Depending on trim, some Elysion models left the factory with HID/xenon low beams while others used halogen, the rest of the exterior lighting is conventional replaceable bulbs. So yes—exterior bulbs are relevant, used and a regular service item on this model.
Those bulbs do the heavy lifting for visibility and compliance: seeing the road ahead, making the van visible from behind, and clearly signalling lane changes and braking. On a family-sized people mover like the Elysion, healthy lighting is essential for night driving, wet weather and highway runs. Keeping globes bright and lenses clear also helps with WOF/roadworthy and rego checks in New Zealand and Australia.
As part of routine servicing, it’s smart to check all exterior lights. If a bulb is out, dim, flickering, or the indicator flashes rapidly, it’s time to replace. Many owners choose to replace bulbs in pairs (both low beams, both brake lights, etc.) so brightness and colour match. For headlamps, note whether the vehicle has halogen or factory HID, match the correct base, wattage and type as specified under the bonnet label or in the owner’s manual.
- Switch the ignition off, remove the key and let the lamps cool.
- Access the lamp holder from behind the housing (under the bonnet for headlights, inside the tailgate trim for rear lamps).
- Twist the bulb holder anticlockwise and pull out gently.
- Install the correct replacement bulb or D-series HID capsule (model-dependent). Avoid touching the glass—use gloves or a clean tissue.
- Refit the holder, test the light, and resecure any covers or trims.
Extra tips for Aussie and Kiwi owners: check fuses before chasing wiring faults, replace perished seals to stop condensation, clean hazy headlamp lenses to restore beam performance, and ensure any LED upgrades are ADR/ECE compliant and suitable for the housing. Carrying a small spare bulb kit can save a long night on a country road. If unsure, a quick bulb check during each service (or every 10,000–15,000 kilometres) keeps the Elysion safe and legal.
Popular questions about 2006 Honda Elysion exterior bulbs
What headlight bulb types does a 2006 Honda Elysion use?
Trim levels vary. Many 2006 Elysions use a factory HID/xenon low beam paired with a halogen high beam, while others are halogen for both. The correct base and wattage are listed in the owner’s manual and often on a label behind the headlamp cover. Always match what’s specified for the exact trim to avoid glare or electrical issues.
How often should exterior bulbs be replaced?
Replace any bulb as soon as it fails, turns pinkish/blue (HID ageing) or looks noticeably dimmer than its pair. As a rule of thumb, check lighting at every service and replace headlamp or brake light bulbs in pairs so brightness and colour match. This helps with WOF/roadworthy and rego inspections.
Are LED headlight conversions legal in Australia or New Zealand?
Only if the LED kit is compliant and used in an appropriate housing. Retrofitting LEDs into halogen reflector housings is often not road-legal and may fail inspection due to beam pattern and glare. If seeking more light, choose ADR/ECE-compliant parts matched to the Elysion’s lamp design, or stick with quality halogen or OEM-spec HID.
